Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Beverly Hills
Gate installation in Beverly Hills runs $4,500 to $18,000 for a typical driveway gate, depending on whether you’re replacing an existing gate or pouring new footings and running fresh power. Most Beverly Hills jobs take three to five working days once the permit is approved, and we coordinate the Beverly Hills Building & Safety inspection on your behalf. If you’re in the Flats, Trousdale Estates, or up in the hills north of Sunset, call (559) 844-6989 and Hal will tell you straight what it’ll cost and how long it takes. We’ve been at this since 2001, and we don’t start a single gate job until the price is written down and agreed to.
Why Gatewood Fence & Gate Is Beverly Hills’s Preferred Gate Installation Company
Hal Gatewood put his name on the shop, and that means something in Beverly Hills, where a lot of gate work gets handed to whichever national outfit picks up the phone first. Our customers here tend to be people who’ve already been burned once. They’ll tell us about a gate that was installed three years ago and now sags, or a motor that has never cycled smoothly, and when we open the access panel we find the last crew left the wire nuts half-crimped and the weather seal folded wrong. That’s the kind of thing that makes us angry, and it’s why we fix what’s there before we talk about swapping anything.
Every installation in Beverly Hills carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back. No phone tree, no service ticket number, no “we’ll have someone in your area next Thursday.” You call, a live person answers, and we schedule the return. That’s how we’ve kept our name good for over 29 years in Southern California.
Our Gate Installation Services in Beverly Hills
Here’s what we install most often in Beverly Hills, and what we’ve learned from working in this specific city:
Driveway Gate Installation
A new driveway gate in Beverly Hills starts with a site check, because the footing requirements and setback rules are different depending on whether you’re in the Flats or up a canyon road. We measure the driveway slope, check the underground utilities, and confirm the exact swing or slide clearance before we ever quote a price. Most Beverly Hills driveway gates are custom iron or steel, and we build to the wind load the Santa Anas will throw at it, not just what looks good in a catalog photo.
Pedestrian Gate Installation
Pedestrian gates in Beverly Hills often sit beside a driveway gate and get used every single day. They need their own hinge post, their own closer, and often their own access control if you want a keypad or intercom. We install them level and square the first time, and if we’re mounting hardware onto existing stucco or stone pillars, we’ll show you exactly how we’re anchoring it before we drill.
Sliding Gate Installation
On the narrower hillside lots north of Sunset, a sliding gate is often the only practical option. The track has to be laid on a concrete footing that won’t shift when winter rain saturates the hillside beneath it. We’ve seen what happens when that footing is under-poured: within a season the gate binds on the rack, the motor strains, and the whole thing needs to be reset. We pour deeper footings than the minimum spec specifically because of the soil movement we see in Beverly Hills.
Swing Gate Installation
Swing gates are the classic Beverly Hills look, especially the heavy wrought iron estate gates in the Flats. The critical piece is the hinge post. If the post flexes or sits even slightly out of plumb, the gate will never close cleanly again, no matter how many times you adjust the operator. We set hinge posts in concrete with enough depth and width for the gate’s actual weight and wind exposure, not just the manufacturer’s default.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
We install and service operators from Linear, DoorKing, and Viking most often in Beverly Hills, along with a few others. We keep common parts for those brands in our truck, so we’re not sitting around for a distributor to ship something while your gate is stuck open. If your existing operator still has life in it and you’re swapping the gate itself, we’ll tell you honestly whether the motor is worth keeping or whether you’ll be back here in eighteen months. A gate operator in Beverly Hills lives outdoors, fights Santa Ana dust, and gets called into service hundreds of times a month – that wears out cheaper units fast.
Common Gate Installation Problems We See in Beverly Hills Homes
- Santa Ana wind loading on solid infill gates. Those big, beautiful solid iron gates in the Flats act like sails when the canyon winds hit. The sustained lateral force fatigues hinge welds and stresses the post base, which shows up as a sag that keeps coming back even after hinge repairs.
- Hillside soil shift after winter rain. Trousdale and the streets above Sunset sit on ground that moves when it gets saturated. Post footings that were poured shallow shift within a single season, and suddenly the slide gate binds on its rack or the swing gate won’t clear the driveway by an inch.
- Smart-home integration failures. A lot of Beverly Hills gates are tied into whole-home systems like Crestron or Control4. When an integrator pushes a firmware update, the relay that triggers the gate can drop silently. The gate goes dead, the safety photocell still works, and most mechanical techs misdiagnose it as a bad board.
- Permit and inspection surprises. Beverly Hills has its own Building & Safety Division. If a previous homeowner swapped a gate without a permit, and you need real work done now, we handle the permit application and inspection coordination so the city sign-off doesn’t become your problem.
Pricing for Gate Installation in Beverly Hills, CA
Here are straight numbers for the Beverly Hills market, not national averages:
- Single swing driveway gate replacement: $4,500 to $9,000 installed, depending on size, material, and whether we reuse the existing posts.
- New sliding gate with fresh footing and track: $8,000 to $18,000, including concrete work, operator, and safety edges.
- Pedestrian gate with keypad access: $1,800 to $4,500.
- Full security gate with intercom and camera integration: $12,000 and up, depending on the access control package.
Your price is quoted and agreed before any work starts. We don’t show up and start adding line items. Call (559) 844-6989 for a free estimate, and note that we offer a free second opinion on any written estimate you already have from another company. Seniors and veterans get a permanent 10% discount, and there’s no trip charge inside the county.
We Also Serve Cities Near Beverly Hills
Our crew runs Gate Installation jobs in West Hollywood, Studio City, Culver City, and Sherman Oaks as well. If you’re just outside Beverly Hills, give us a call and we’ll tell you whether you’re in our regular service area before anyone gets in a truck.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Beverly Hills
Yes. Beverly Hills is an independent municipality with its own Building & Safety Division, and every gate replacement or modification requires a Beverly Hills permit and inspection, not an LA City or LA County approval. We handle the permit application and meet the inspector on site so the job gets signed off without you chasing the city. Call (559) 844-6989 and we’ll confirm what your specific job triggers before you spend a dollar.
Every automatic swing gate has a manual release mechanism, usually a keyed lever or pull handle on the operator housing. Pulling it disengages the motor so you can push the gate by hand. Do not force the gate open without releasing the operator first – you’ll strip the drive gear and turn a simple blackout into a repair bill. If you’re not sure where your release is, call us and we’ll walk you through it over the phone, or send the person who installed it out to show you.
Because the problem is usually in the hinge post, not the hinge. In the Flats, those solid infill gates catch the Santa Ana winds that funnel through the canyons, and the repeated lateral load works the post base or the weld joints until the gate drops out of level. Fix the panel without the post and you’ll fix it twice. We check the post, the footing, and the welds before we touch a hinge, because a sag in the middle almost always starts at the post. Call (559) 844-6989 and we’ll tell you what you’re actually dealing with.
Yes, and it happens more than people expect. In Beverly Hills, a very high percentage of gates are integrated into Crestron, Control4, or Savant systems. When the integrator pushes a firmware update, the relay that triggers the gate operator can drop, leaving the operator completely dead even though the safety photocell and loop detector still have power. We’ve worked alongside AV integrators in Trousdale Estates and the hills above Sunset enough times to recognize the symptom immediately, which saves you a misdiagnosis and a wrong quote. We fix the gate side, they fix the integration side, and the thing works again.
Yes. California law and Beverly Hills municipal code both require entrapment protection on automatic gates, typically safety photocell beams and reversing edges that stop the gate if anything is in the way. Any new gate installation we do in Beverly Hills includes the required entrapment protection, and we test it in front of you before we call the job done. If your existing gate lacks it, that’s a safety issue and a code violation, and we’ll tell you what it takes to bring it into compliance. Call (559) 844-6989 for a free check.
Call Gatewood Fence & Gate for Your Beverly Hills Gate Install
You’ll get Hal Gatewood or one of his crew on the phone, not a menu. We’ll ask about your gate, your street, your driveway slope, and what the gate needs to do. Then we’ll give you a price range you can plan around, and we’ll put the final number in writing before anything gets started. If you already have an estimate from someone else, bring it over – we’ll give you a free second opinion on it. Reach us at (559) 844-6989 any hour, any day. We’ll answer.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills and surrounding Los Angeles County communities since 2001.