Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Beverly Hills
Gate repair in Beverly Hills runs $180 to $1,400 depending on the job, and most hinge, realignment, and our Gate Motor & Opener in Beverly Hills repairs are done in one visit. We’ve worked on gates from the Spanish Colonial estates in The Flats to the mid-century modern driveways above Sunset since 2001, so we know what Beverly Hills gates do when the wind, rain, and smart-home systems all start working against you. If your gate is stuck, sagging, scraping, or refusing to respond to the remote, call Hal Gatewood’s crew at (559) 844-6989. A live person answers, day or night.
Here’s what Beverly Hills homeowners should know right away: a gate that won’t open or close usually fails at the hinge post, the operator, or the wiring between them. We fix all three, and we do it at your driveway, not in some shop across town. Our Gate Repair team welds on site, carries parts for the big brands, and stands behind every job with the 90-Day Done Right Promise in writing.
Why Gatewood Fence & Gate Is Beverly Hills’s Preferred Gate Repair Company
Hal Gatewood’s name is on the shop, the license is published, and he’s been at this since 2001. That means when we say we’ll be there in the window we gave you, we mean it. Beverly Hills customers don’t call us because we’re the cheapest. They call because they’ve had a national outfit quote one price on the phone and charge another at the door, and they’re done with that game. Our price is quoted and agreed before any work starts. Period.
We answer the phone with a live person 24/7, not a voicemail tree. When your gate fails on a Friday night before a weekend of guests or a Monday morning school run, you don’t need a call center. You need a person who can hear what the gate is doing and tell you whether it’s safe to leave it or whether the operator needs to be disconnected now.
We serve Beverly Hills from our Los Angeles office, with crews in the city all week. That means response times measured in hours, not days, and a published address you can verify. Background-checked, uniformed techs show up in a marked vehicle. You’ll see the same faces on the follow-up visit that you saw on the first one.
Our Gate Repair Services in Beverly Hills
Electric Gate Repair
Beverly Hills has more electric gates per block than almost any city in California, and a huge share of them are tied into Crestron, Savant, or Control4 systems. When your Gate Access Control in Beverly Hills stops triggering the gate, the problem might be the operator or it might be the relay logic in your home automation. We check both before we quote anything. Electric gate repair in Beverly Hills typically runs $240 to $780 depending on whether we’re replacing a control board, a receiver, or the operator itself.
Automatic Gate Repair
Automatic gates take more abuse in Beverly Hills than people realize. Santa Ana winds push hard against large swing gates for hours at a time, and that stress lands on the motor, the rack, and the limit switches. When an automatic gate stops mid-travel or jerks instead of gliding, we test the full path: power supply, circuit board, sensor alignment, and mechanical load. If a firmware update from your AV integrator broke the relay, we’ll work with them directly instead of guessing.
Hinge & Post Repair
This is the repair we make most often in Beverly Hills, and it’s the one other companies skip. A gate sags in the hinge post, not in the middle. Fix the panel without the post and you’ll fix it twice. On older estates, especially the 1920s and 1930s Spanish Colonials in The Flats, the original steel posts were set in concrete footings that predate modern code. After a wet winter or a few heavy wind seasons, those posts pull out of plumb and the gate binds on the hinges. We replace posts, pour new footings to Beverly Hills code, and do our Gate Parts & Welding in Beverly Hills to get hinges back on site. Hinge and post repair runs $380 to $1,400 depending on post size, footing condition, and whether we’re working with stone, stucco, or brick pillars.
Gate Realignment
A gate that scrapes the driveway, won’t latch, or hangs crooked usually needs realignment, not replacement. We see this a lot on hillside properties north of Sunset, where soil shift after rain moves posts just enough to throw everything off. Realignment on a typical Beverly Hills gate runs $180 to $420, and it’s usually done the same day. We square the posts, reset the hinges, adjust the operator stops, and test the safety edges and photocells before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Beverly Hills specifically, we see a lot of Linear and DoorKing operators on older estate gates, plus Viking and Ghost Controls on newer installations. We carry parts for the most common failures on our trucks so we don’t have to leave your gate half-fixed while we order a board. When we do need a part that has to come from the manufacturer, we’ll tell you the lead time before we take the job.
Common Gate Repair Problems We See in Beverly Hills Homes
- Wind-lashed swing gates with cracked welds. The canyons bordering Beverly Hills funnel Santa Ana winds straight into the city, and a large solid-infill iron gate acts like a sail. Over a few wind seasons, hinge welds crack and the gate starts to sag. We reinforcement-weld on site and add bracing where the original fabricator cut corners.
- Waterlogged motor housings in The Flats. Flat-lot driveways south of Santa Monica Boulevard don’t drain fast enough during winter downpours, and below-grade motor boxes flood. The control board shorts, and the gate stops mid-travel. We dry the housing, replace the board if needed, and reseal the enclosure properly.
- Smart-home relay failures after firmware updates. This one hides in plain sight. Your gate operator is fine. Your Crestron or Savant update is not. The relay that tells the gate to open silently loses its programming, and suddenly your remote does nothing. We test the operator first, then coordinate with your integrator to restore the trigger logic.
- Hillside posts thrown out of plumb. North of Sunset, especially through Trousdale Estates, winter rain saturates the hillside soil and moves it. A gate post that was perfectly plumb in September can be an inch out by March, which means the gate binds at the halfway point or fails the photocell alignment. We reset the post, repack the footing, and bring everything back to square.
Pricing for Gate Repair in Beverly Hills, CA
Here’s what gate repair actually costs in Beverly Hills. Hinge repair runs $180 to $420. Gate realignment runs $180 to $420. Electric gate repair runs $240 to $780, and that number goes higher only when we’re replacing a full operator assembly. Full post replacement with a new concrete footing runs $380 to $1,400. A complete new gate installation, which includes a site measure and Beverly Hills permit coordination, starts around $2,200 and is quoted in writing before we order anything.
What changes the price is the weight of the gate, the condition of what’s under the ground, and whether we’re coordinating with a smart-home integrator. What doesn’t change the price is surprise add-ons at the end. The number we agree on is the number on the invoice. Stand with us while we quote it, and you’ll know what the job costs before we set a tool down.
Senior and veteran customers get 10% off every job, permanently. Any repair over $200 gets $40 off. No trip charge inside the county. And if you already have a written estimate from another company, bring it to us for a free second opinion.
We Also Serve Cities Near Beverly Hills
We work across the west side, so if you’re searching for gate repair near Beverly Hills, we also cover West Hollywood, Studio City, Culver City, and Sherman Oaks. Same crews, same 90-Day Done Right Promise, same published address. If you’re in one of those cities and your gate is down, call us at (559) 844-6989.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Beverly Hills
Every automatic gate operator has a manual release mechanism, usually a keyed cylinder or a pull handle near the motor housing. Turn the key or pull the release to disengage the gear, then push the gate open by hand. Do not force the gate while the operator is engaged. If the release is seized from rust or lack of use, which we see often on older Beverly Hills estates, call us at (559) 844-6989 and we’ll free it up and replace the release assembly if it’s past saving. Don’t try to force a stuck release with a pipe wrench; you’ll snap the key cylinder, and that’s a more expensive fix than the original problem.
Usually it’s both. The wind leaned on the gate, and the gate leaned on the hinge post. If the post is original to a 1930s or 1940s estate, the footing underneath may have been undersized from day one. Over enough wind seasons, the post flexes just enough to let the gate drop at the latch corner. The fix is to reset or replace the post, not just lift the gate. In Beverly Hills, this repair runs $380 to $1,400 depending on post condition. We’ll tell you exactly which one before we start.
The firmware update almost certainly broke the relay logic between your automation system and the gate operator. Your gate is probably fine. The trigger signal from the Crestron, Savant, or Control4 system is not. Our technician will test the operator independently first, then coordinate with your AV integrator to confirm where the signal drops. We’ve done this enough times in Beverly Hills that we have a straight line of communication with most of the integrators working here. Call (559) 844-6989 and we’ll sort out which end of the signal is broken.
Beverly Hills is an independent municipality with its own Building & Safety Division, so the permit rules here are not the same as LA City rules. A hinge or post replacement within the existing footprint typically doesn’t require a permit. A full gate replacement, a new operator installation, or any change to the driveway’s electrical footprint usually does. When we quote a job, we’ll tell you which category yours falls into and handle the permit pull and scheduling with Beverly Hills inspectors. We don’t leave you to figure out city paperwork on your own.
On a hillside in Trousdale, it’s more likely the post than the rack. Winter rain soaks the soil, and the downhill post shifts just enough to knock the track out of alignment. The gate then drags on the rack and pinion because the rails are no longer parallel. A rack and pinion gear that’s truly stripped is rare; a post that moved half an inch is not. We start by checking post plumb before we order any parts, because you should not pay for a gear replacement that wasn’t the real problem. Call (559) 844-6989 and we’ll put a level on it and tell you what’s actually moving.
One more thing worth mentioning. On a Spanish Colonial estate in The Flats, the ornate 1930s wrought iron swing gate had stopped responding to the intercom and keypad entry altogether. Our tech traced it to a failed post footing that had pulled the hinge post out of plumb after winter rains, but the gate operator itself tested fine. We worked alongside the homeowner’s Crestron integrator to confirm the relay logic was intact, then poured a new concrete footing, replaced the worn hinge post, and realigned the gate to close flush with the safety photocell beam. That’s the kind of repair Beverly Hills throws at you, and it’s the kind we’ve been untangling since 2001.
Call Gatewood Fence & Gate for Beverly Hills Gate Repair
When your gate fails, you need someone who knows Beverly Hills gates: the permits, the smart-home tie-ins, the soil, the wind, the vintage ironwork. That’s us. Call (559) 844-6989 now for a free estimate. We’ll answer in person, give you a straight price, and show up when we say we will. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills since 2001.