Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Beverly Hills
Gate access control in Beverly Hills usually means one of two things: a keypad or remote that stopped talking to the operator, or a system that needs to be upgraded so your phone, card reader, or intercom triggers the gate properly. We handle both, and we handle them in Beverly Hills driveways every week. Whether your estate is in the Flats or up a canyon off Sunset, you’ll get Hal’s crew with the parts to fix it right the first visit. Call (559) 844-6989 and you’ll get a live person who knows gates, not a recording.
The operator is only half the system out here. Beverly Hills has its own Building & Safety Division, which means any access control modification, even reprogramming a keypad to a new operator, requires a Beverly Hills permit and inspection, not an LA City or LA County one. We pull the permit, do the work, and stand for the inspection. That’s the difference between a gate that works until it doesn’t and one that works for years.
Why Gatewood Fence & Gate Is Beverly Hills’s Preferred Gate Access Control Company
We have been at this since 2001, and Hal Gatewood still answers his own phone. His name is on the shop, his address is published, and his license number is there for anyone to look up. In Beverly Hills, that matters. Homeowners here have seen too many techs show up late, quote one price, and then hand over an invoice that looks nothing like the estimate.
That is not how we work. Every job carries our 90-Day Done Right Promise in writing. If the gate doesn’t keep working after we leave, one call brings us back. No runaround, no fine print. And our price is quoted and agreed before any work starts. What we say on the phone is what you pay at the door.
We send background-checked, uniformed technicians to Beverly Hills, and the person who shows up knows the difference between a LiftMaster control board and a Crestron relay logic failure. That distinction saves Beverly Hills homeowners thousands in misdiagnosed repairs. Dispatch and scheduling are coordinated from our Los Angeles office, and crews serve Beverly Hills locally, so response times are measured in hours, not days.
Our Gate Access Control Services in Beverly Hills
Keypad Entry
Keypad entry is the most common access control request we get in Beverly Hills, and the most common reason it fails here is not the keypad itself. It’s the wiring run through a pillar that has shifted in saturated ground after winter rain. We trace the run, repair or replace the wire, and reprogram the keypad under permit. A new keypad installed in Beverly Hills typically runs $225-$475 depending on whether we’re replacing an existing working unit or running new line.
Remote Control
When a remote stops working on a Beverly Hills estate, the first thing we check is not the remote battery. It’s whether the gate operator is receiving power and whether a smart-home integrator changed something upstream. We see this constantly: a Crestron or Control4 firmware update silently kills the relay trigger, and suddenly every remote in the house is dead. We coordinate with your AV integrator to restore the logic, and we handle the operator side ourselves. Remote receiver replacement and reprogramming runs $150-$350.
Phone Entry
Phone entry systems let visitors call from the gate pedestal and you buzz them in from your phone. In Beverly Hills, these systems are often tied into the house intercom or the Crestron app, which means two systems need to agree. We repair the gate side, including the relay, the power supply, and the pedestal wiring, and we work alongside your integrator on the software side. A new phone entry system typically runs $850-$2,200 in Beverly Hills, depending on whether it’s a standalone unit or integrated into an existing automation platform.
Card Reader
Card readers are common on Beverly Hills properties with staff, caregivers, or frequent vendors. We install and repair proximity readers, Wiegand and OSDP readers, and standalone card systems that don’t require a monthly subscription. If your card reader stops reading, it’s often a corroded reader head or a failing controller board, both of which we replace under permit. Card reader replacement generally runs $350-$900.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
We are certified to service nine major gate brands, and in Beverly Hills we see a lot of Linear, DoorKing, and Viking operators on older estate gates, plus Ghost Controls on newer retrofits. We stock common replacement parts locally, so we don’t have to order a board and make you wait a week. If your gate access control is tied to a Linear operator on the Flats or a Viking unit up in Trousdale, we’ve likely fixed that exact configuration before.
Common Gate Access Control Problems We See in Beverly Hills Homes
- Santa Ana winds overloading solid-infill gates: Sustained lateral force on oversized wrought iron swing gates accelerates hinge wear and stresses welds. The gate binds, the operator pulls more amps, and the control board gives out. We repair the gate, not just the board.
- Winter rains flooding below-grade motor housings: Flat-lot driveways in the Flats collect runoff, and below-grade operators sit in the low point. Corroded control boards and shorted loop detectors make the gate unresponsive to every access input at once.
- Smart-home firmware breaking relay logic: A Crestron or Savant update can silently drop the relay trigger to the gate operator. Remote control and phone entry look dead, but the operator is mechanically fine. We diagnose the actual fault before quoting anything.
- Gate posts shifting out of plumb after rain: Beverly Hills hillside soil moves when it gets saturated. A post that moves even half an inch binds the gate and trips the safety reversal, which looks like an access control failure but is really a footing problem.
Pricing for Gate Access Control in Beverly Hills, CA
Here’s what we quote in Beverly Hills, and these numbers are what you pay, agreed before we touch the gate:
- Keypad replacement or new install: $225-$475
- Remote receiver replacement and reprogramming: $150-$350
- Phone entry system replacement: $850-$2,200
- Card reader replacement: $350-$900
- Control board replacement under permit: $275-$650
- Fault diagnosis when another company misquoted it: free second opinion on any written estimate
What moves the number is the age of what’s there, whether we’re reusing existing wiring or running new, and whether a smart-home integrator has to be part of the job. We tell you the number up front. Every quote includes the Beverly Hills permit fee so the inspection never surprises you. And standing offers apply here too: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (559) 844-6989 for a free estimate.
The part nobody else tells you: in Beverly Hills, the operator is only half the system. The city’s Building & Safety Division requires a Beverly Hills permit for every gate access control modification, and the inspectors enforce local codes closely. We have the permitting process down to a routine, which means your inspection passes and your gate works. That playbook is exactly what a generic gate repair page never covers.
We Also Serve Cities Near Beverly Hills
Our team handles Gate Access Control work across the Westside, including West Hollywood, Studio City, Culver City, and Sherman Oaks. If you’re in Beverly Hills or any neighboring city, call us for the same local service and upfront pricing. One number, one local shop, no call center.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Beverly Hills
Because Beverly Hills is an independent municipality with its own Building & Safety Division, and that division requires a local permit for any electrical or access control modification, including control board replacement on a gate operator. We handle the permit as part of the job, schedule the inspection, and meet the inspector on site. Skipping the permit saves a few days now and creates a disclosure problem when you sell the house. Call (559) 844-6989 and we’ll explain exactly what your specific gate requires.
In Beverly Hills it’s usually a post problem. Heavy rain saturates the hillside soil and flat-lot driveways in the Flats, and a gate post that shifts half an inch binds the gate enough to trip the safety reversal. A safety sensor failure looks different: the gate reverses with a blinking light and no visible binding. We check the post plumb first, because fixing the sensor without fixing the post means you’ll fix it twice. Call for an assessment.
Every gate operator has a mechanical manual release, usually a keyed lock or a pull chain on the operator housing, that disengages the drive so you can push the gate by hand. The Crestron integration doesn’t change that; it only controls the trigger, not the release. If you don’t know where yours is, we’ll show you during any service call, and we can label it so you’re not fumbling in the dark during a blackout.
If the keypad works, the operator and its power supply are fine. The problem is on the integration side: a Crestron or Control4 firmware update probably broke the relay logic that tells the operator to open when the app triggers it. We coordinate with your AV integrator to confirm the relay state, and then we make the gate side right. This is the most common misdiagnosis in Beverly Hills, and a lot of people pay for a new operator they didn’t need. Call us before you approve that quote.
Mostly the hinges and the weld points. Hollow tube is more likely to flex; solid bar rarely bends from wind alone. What Santa Ana winds do is stress the welds and hinge pins on heavy solid-infill swing gates, especially the oversized estate gates in the canyon neighborhoods off Benedict and Coldwater. If your gate is sagging or dragging on the striker, the wind has taken something out of alignment, and a hinge or welding repair will set it straight. We weld on site, in your driveway, not at some third-party shop.
If you’ve got a gate access control problem in Beverly Hills, call (559) 844-6989. You’ll reach a person who can tell you what’s wrong, what it costs, and when we’ll be there. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills since 2001.