Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Beverly Hills
Gate parts and welding in Beverly Hills follow a different set of rules than anywhere else in the region, and if you live here, you already sense it. The city has its own Building & Safety Division, its own inspectors, and its own permit path that West Hollywood and Culver City simply don’t require. That reality shapes every hinge replacement, post reset, and custom weld we do in the 90210, 90211, and 90212 zip codes. Hal Gatewood has been fixing gates since 2001, and when your estate gate sags after a Santa Ana wind event, you can call (559) 844-6989 and talk to a live person, any hour of the day or night.
Beverly Hills gates run large, heavy, and ornate. Many of them have been automated, re-automated, and retrofitted over decades. The mix of original 1920s ironwork and newer LiftMaster or FAAC operators on the same pillar means the person who shows up has to understand both the metallurgy and the automation. That’s what our Gate Parts & Welding team does. We weld on site, in your driveway, so your gate never leaves your property.
Why Gatewood Fence & Gate Is Beverly Hills’s Preferred Gate Parts & Welding Company
We answer the phone. That sounds small, but when a gate won’t close on a Friday evening and you’re in Trousdale Estates with an open driveway, a live person on the line makes a difference. Hal Gatewood’s name is on the shop and the invoice, and he has been at this since 2001, owner-operated the whole way. We’re not a dispatch board routing strangers to your property. The person who answers the phone is often the person who shows up.
Our reputation in Beverly Hills comes from showing up when we say we will and fixing what’s actually broken. A big share of our calls here start the same way: a homeowner called someone else, got a quote for a full gate replacement, and called us for a second opinion. We give free second opinions on any written estimate, and more often than not, the gate doesn’t need replacing. It needs a hinge plate welded, a post re-set, or a roller swapped. We charge $40 off any repair over $200, and there’s no trip charge inside the county. Seniors and veterans get a permanent 10% discount. Every job carries the 90-Day Done Right Promise in writing. If it’s not right, Hal comes back.
Beverly Hills hillside work is different from flat-lot work, and we’ve learned that the hard way over the years, the way you learn things you don’t forget. A gate in The Flats and a gate on a steep Trousdale driveway present different alignment, counterbalance, and drainage problems. Knowing the difference before we unload the welder is what saves you time and money.
Our Gate Parts & Welding Services in Beverly Hills
Hinge Replacement
Hinge replacement in Beverly Hills is rarely a simple bolt-off, bolt-on job. The original hinges on many Spanish Colonial and English Tudor gates in The Flats were custom-forged and welded into the gate frame decades ago. When a hinge plate cracks after years of wind load, the repair usually involves cutting out the old plate, grinding the surface clean, and welding a reinforced replacement in place, then re-balancing the gate so it doesn’t sag again. A gate sags in the hinge post, not in the middle, and that’s where we start.
Post Replacement
Post replacement on a Beverly Hills property starts with a permit from the city’s Building & Safety Division and ends with an inspection by a Beverly Hills inspector. In between, there’s excavation, new concrete with proper drainage, and careful re-setting so the post is absolutely plumb. Winter rains saturate hillside soil and throw posts out of alignment within a season. We re-set posts to stay re-set, with footings sized for the wind load that funnels through the canyons during Santa Ana events.
Rail Repair
Rail repair on slide gates in Beverly Hills often means addressing what the hillside did, not just what the welder can fix. In Trousdale Estates, soil shift after saturation throws slide gate rails out of alignment, and the rack and pinion drive then strips or jams mid-travel. We weld and true the rail, re-align the drive, and check the post footings so the problem doesn’t repeat with the next storm.
Custom Welding
Custom welding in Beverly Hills often means matching new work to original ironwork that is eighty or ninety years old. We weld on site, in your driveway, which lets us match the existing material, profile, and finish without hauling the gate off. When a custom wrought iron estate gate gets a fatigue crack at a hinge plate, we can have the gate welded, ground, and re-hung the same day. We also fabricate replacement pickets, scrolls, and brackets to match original patterns on homes in The Flats and north of Sunset.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
We service and repair gates built around nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Beverly Hills, we see a lot of LiftMaster operators on newer automated gates and FAAC units on older swing systems, often paired with BFT or Viking hardware on the same property over the years. Because we’re working in Beverly Hills regularly, we keep common gate parts on the truck, so many repairs happen in a single visit rather than a two-trip affair. If we need a less common part, we know exactly where to get it fast in the Los Angeles area.
Common Gate Parts & Welding Problems We See in Beverly Hills Homes
- Weld fatigue at hinge plates during Santa Ana winds. Heavy custom iron swing gates over ten feet wide take sustained lateral force when canyon winds hit. Cracks form at the hinge plates and go unnoticed until the gate droops and binds. We weld the cracks, reinforce the plates, and re-balance the gate.
- Flooded below-grade motor housings in The Flats. LiftMaster and Viking operators sometimes sit in shallow motor pits on flat-lot driveways. The first heavy winter rain floods the housing, shorts the control board, and often takes the safety photocell wiring with it. We replace the board, re-wire the photocells, and seal the housing against the next storm.
- Post footings that shift after one rainy season. Hillside soil, thin over bedrock in places, saturates and heaves. Trousdale Estates and other hillside properties see slide gate posts move enough to throw the rail out, strip the rack, and jam the gate mid-travel.
- Smart-home integrator conflicts. A Crestron or Savant firmware update silently breaks the relay logic that triggers the gate operator. The gate operator itself is fine. The gate won’t move anyway. We coordinate with your integrator to restore the relay logic while we verify the mechanical side is sound.
Pricing for Gate Parts & Welding in Beverly Hills, CA
Here’s what gate parts and welding work in Beverly Hills actually costs based on the jobs we do here week after week:
- Hinge replacement (weld-in reinforced hinge plate): $185-$420 per hinge, depending on gate weight and whether we’re matching original ironwork.
- Post replacement (re-set in new concrete with proper footing): $800-$2,400, including excavation, concrete, welding, and alignment. Permits and inspections through Beverly Hills Building & Safety add cost and time.
- Rail repair and drive re-alignment on a slide gate: $350-$950, depending on the length of the run and how far the rail has moved.
- Custom welding (crack repair, picket or scroll fabrication, bracket reinforcement): $150-$600 for most crack repairs; full custom fabrication is quoted by the hour at $110-$160, materials included.
- Control board replacement after a flooded motor housing: $240-$600, plus the cost of the board if it’s a LiftMaster or Viking part we don’t have on the truck.
The price you’re quoted is the price you pay. It’s agreed before any work starts, in writing, and it doesn’t change at the door. Call (559) 844-6989 for a free estimate. If you already have a written estimate from someone else, bring it in. We’ll give you a free second opinion and show you what’s actually broken and what isn’t.
A note on Beverly Hills permits: any gate modification or replacement in Beverly Hills requires a permit from the city’s own Building & Safety Division, not LA City or LA County. That includes post replacement and, in many cases, structural welding. We handle the permit paperwork and coordinate the inspection, and we’ll tell you up front what the city requires for your specific job. It’s a step that doesn’t exist in West Hollywood or Culver City, and skipping it creates a lien risk on your property. We don’t skip it.
We Also Serve Cities Near Beverly Hills
While this page is for our Beverly Hills neighbors, our crews also work regularly in West Hollywood, Studio City, Culver City, and Sherman Oaks. If you’re in one of those cities and need gate parts or welding, we can help you there too. Our Gate Parts & Welding in Beverly Hills operation is local to the area, and the same people who fix gates in The Flats serve the surrounding communities.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Beverly Hills
In most cases, a simple weld repair to a cracked hinge on an existing gate does not require a Beverly Hills permit, because the city treats minor in-kind repairs as maintenance. However, if the hinge replacement changes the gate’s structure, footing, or weight distribution, or if a post is being re-set, the city’s Building & Safety Division does require a permit and inspection. We’ll tell you which applies to your specific repair and handle the paperwork either way. Call (559) 844-6989 and we’ll walk you through it.
Santa Ana winds funnel through the canyons and hit wide, solid iron gates with sustained lateral force. A ten-foot solid infill gate is essentially a sail. The constant flexing concentrates stress at the hinge plates, where the metal is already thinner from decades of use. Hairline fatigue cracks form, widen over time, and then fail suddenly, dropping the gate and binding the operator. We weld the cracks, add reinforcement, and re-balance so the gate carries wind load without flexing at the welds.
Probably both, but start with the right diagnostic. A Crestron or Savant firmware update can silently break the relay logic that sends the open command to your gate operator. The gate operator is often fine. We see this in Beverly Hills all the time because so many estate gates run through whole-home automation. We’ll test the operator and the mechanical side, and if the relay logic is the problem, we’ll coordinate with your integrator to restore it. If the gate is also mechanically binding, we’ll fix that while we’re there. Call (559) 844-6989 and describe what you’re seeing; we’ll tell you what’s likely going on.
The soil in The Flats sits over an old alluvial plain, with layers of clay and sand that drain poorly in sections. When winter rain saturates the ground, the soil expands and softens, and a heavy gate post with a large swing gate hanging off it starts to lean. Once movement starts, the gate drags, the hinges bind, and the post gets worse. We dig out the old footing, re-set the post in new concrete with proper drainage, and size the footing for the full gate load plus wind load. It’s the difference between a post that stands for decades and one that leans again next year.
Every automatic gate operator has a manual release, usually a pull handle, keyed bypass, or T-handle near the operator itself. In Beverly Hills, given how many gates are tied into Crestron or Control4 systems, you may also need to disable the automation command from the integrator’s app or keypad first. Stop the operator from trying to drive the gate, then pull the manual release and push the gate slowly by hand. If the gate is heavy, don’t force it once released; call us at (559) 844-6989 and we’ll come secure it and restore power safely. Electrical panels and high-tension springs are dangerous to work around, and we’d rather you not hurt yourself trying to diagnose it.
Gate Parts & Welding in Beverly Hills: The Full Picture
What makes Beverly Hills genuinely different for gate work is the combination of city-specific permitting, wind-load on solid infill gates from canyon funneling, soil and drainage issues in The Flats and the hills, and the concentration of smart-home-integrated automation that doesn’t exist a few miles away in West Hollywood or Culver City. A gate repair here isn’t just a mechanical job. It’s a permit question, a wind-load question, a drainage question, and sometimes an integrator coordination question all at once. Our crew recently replaced a sagging hinge post on a Spanish Colonial Revival estate in The Flats. Decades of retrofitted automation had left a Viking operator paired with original 1940s ironwork. The post footing had loosened after winter rains, so we re-set the post in new concrete, welded reinforced hinge brackets, and coordinated with the homeowner’s Crestron integrator to restore the relay logic that a firmware update had silently broken. That’s a Beverly Hills gate repair. That’s what we do.
If your gate is sagging, binding, cracked, or refusing to trigger, call (559) 844-6989. You’ll get a live person, a straight answer, and a free estimate. We’ll come to your driveway, weld what needs welding, replace what needs replacing, and stand behind the work with the 90-Day Done Right Promise. Hal Gatewood’s name is on the shop. That’s how you know it gets done right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills since 2001.