Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterWeld & Rust Repair in Beverly Hills, CA
Weld and rust repair for residential gates in Beverly Hills typically costs between $150 and $450 depending on the extent of the metal corrosion and whether we need to fabricate new bracing on-site. For Automatic Gate Repair, pricing may vary based on the opener system involved. If your gate is sagging, dragging on the driveway, or showing deep, flaking rust at the hinges, you don’t need a full replacement; you need a welder who knows how to restore structural integrity without ruining your finish. At Gatewood Fence & Gate, we specialize in on-site welding that fixes the problem right at your property, saving you the expense and hassle of hauling your gate to a shop.
When I started this business back in 2001, I realized that most companies in Beverly Hills just want to sell you a brand-new gate. That isn’t how we operate. If the metal is sound, I can fix it. Whether you are dealing with a heavy-duty wrought iron entry or a standard steel driveway gate, my team and I focus on reinforcing the stress points that usually fail first. We handle all kinds of gate issues, so if you are looking for general Gate Repair in Beverly Hills, we are the ones to call. You can reach us directly at (559) 844-6989 to talk about your gate’s condition.
When You Need Weld & Rust Repair
Rust is more than just an eyesore. In our local climate, humidity and morning dew settle into the joints of your gate, slowly eating away at the steel from the inside out. When you start seeing these signs, it is time to call for our Gate Repair services before the damage compromises the entire frame.
- Hinge Separation: If you see the weld at your hinge post pulling away or cracking, the gate is at risk of falling. This is a safety hazard, especially for families with children or pets, and it needs immediate professional attention.
- Bottom Rail Decay: The bottom of the gate is where water pools and debris collects. If you can poke a screwdriver through the rusted metal at the base, the structural integrity is gone and it needs to be cut out and replaced with fresh steel.
- Sagging Panels: A gate that drags across the driveway is usually suffering from a failed diagonal brace or a rusted-out corner joint. We can re-weld these joints and add support to get your gate swinging level again.
- Broken Latch Receivers: When the metal around your latch or locking mechanism rusts through, the gate won’t close securely. We can fabricate new plates and weld them into place so your latch engages perfectly every time.
- Decorative Element Loss: Over time, scrollwork or decorative finials can snap off due to rust at the connection points. We can weld these back on so your gate keeps its original aesthetic without needing a full rebuild.
Ignoring these signs usually leads to more expensive work later. A gate that drags on the concrete puts unnecessary strain on your opener motor, whether you have a LiftMaster, Viking, or BFT unit. Fixing the metal now prevents a burned-out motor later.
Our Weld & Rust Repair Process
My approach to welding is simple: I do it the way I would want it done on my own house. I don’t believe in quick fixes that fail six months later. When you call us, you get a repair that lasts.
- Assessment of the Metal: I come to your property and inspect the gate, not just the rust. I look at the thickness of the remaining steel to determine if it can hold a new weld or if we need to cut out the bad section entirely.
- Surface Preparation: Before any welding happens, we grind the area down to bare, clean metal. If we weld over paint or rust, the bond will be weak and porous. We take the time to do this right.
- Structural Reinforcement: If the original design was weak, we don’t just mimic it. We add gussets or internal bracing where the gate needs it most, ensuring the fix is stronger than the original factory weld.
- Precision Welding: We use high-quality welding equipment to fuse the steel. Because we do this on-site, I can adjust the gate’s alignment in real-time as the metal cools, ensuring it hangs perfectly square.
- Finish Protection: After the weld is complete and ground smooth, we apply a rust-inhibiting primer and touch-up paint to match your existing gate color, sealing the repair against future Beverly Hills humidity.
Every job we do is backed by our 90-Day Done Right Promise. If the weld doesn’t hold or the gate isn’t functioning as promised, I will come back and make it right. No runaround, no excuses.
Weld & Rust Repair Pricing in Beverly Hills
We believe in upfront, honest pricing. I don’t use hidden fees or “trip charges” for customers inside the county. Because every gate is unique-some are simple steel, others are elaborate wrought iron-the cost depends on the severity of the damage. Here is how we generally charge for weld and rust repair services.
| Service Type | Estimated Price Range |
|---|---|
| Minor Hinge or Latch Weld | $150 - $225 |
| Bottom Rail Patch & Reinforcement | $250 - $400 |
| Structural Brace Fabrication | $300 - $450 |
| Full Gate Re-alignment & Welding | $350 - $500 |
If you have a written estimate from another company, I am happy to provide a free second opinion. We also offer $40 off any repair over $200 and a permanent 10% discount for seniors and veterans. Call (559) 844-6989 to get an exact quote for your specific gate.
FAQs - Weld & Rust Repair
Can you fix a gate that is dragging on the ground?
Yes, we can almost always fix a dragging gate by addressing the root cause, which is usually a failure in the hinge post or a rusted-out bottom corner. We will re-weld the frame, reinforce the structural joints, and perform Gate Realignment to lift the gate clear of your driveway. Call (559) 844-6989 so I can take a look at your hinge setup.
Is it cheaper to repair the rust or replace the whole gate?
In most cases, repairing the rust and reinforcing the existing gate is significantly cheaper than buying a new one, often costing a fraction of a full replacement. Unless the metal is so far gone that it has turned to dust, we can fabricate patches and weld them into place to extend the life of your gate for years. We prioritize saving your existing gate whenever it makes sense.
Do I need to take the gate off the hinges for you to weld it?
No, we perform all our welding right in your driveway. By keeping the gate in place, we can ensure the alignment is perfect as we work, and it saves you the hassle of finding a way to transport a heavy iron gate to a shop. My truck is fully equipped to handle on-site repairs for Linear, Ghost Controls, and other major brands.
How long does a weld repair last?
A properly executed weld on a clean, prepped surface should last as long as the rest of the gate. We take the time to grind down to bare metal and use high-quality materials to prevent future corrosion. Because we stand behind our work with a 90-Day Done Right Promise, you have the peace of mind that if there is an issue, I will be the one coming back to fix it.
When you need a gate that works, you need someone who understands metal, not just someone who swaps out parts. We have been serving this community since 2001, and my name is on every invoice. If you are tired of companies that don’t call back or want to sell you things you don’t need, give me a call at (559) 844-6989. We answer the phone 24/7, and we are ready to help.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills.