Electric Gate Repair in Beverly Hills, CA

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

Wrought iron

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Electric Gate Repair in Beverly Hills, CA

Electric gate repair in Beverly Hills typically costs between $250 and $650 for common motor and sensor issues, depending on the specific brand and the complexity of the wiring fault. If your gate has stopped responding to your remote, is reversing unexpectedly, or is making a grinding noise, we can usually diagnose the issue and provide a repair estimate the same day you call. At Gatewood Fence & Gate, we handle everything from gate realignment and basic sensor adjustments to complex circuit board replacements for systems like Viking, Linear, and BFT. If you are dealing with a gate that won’t close or a motor that is humming but not moving, call (559) 844-6989 to speak with us directly.

I have been fixing gates in this area since 2001, and I have seen the same problems pop up in Beverly Hills neighborhoods over and over again. Whether you are up in the hills where the steep driveways put extra strain on the motor, or down in the flat areas where moisture can play havoc with your electrical boxes, you need a fix that lasts. I do not believe in swapping out expensive parts that still have life in them, and I certainly do not believe in charging you for parts you do not need. When you call us for Gate Repair, you are getting me or my crew-not a dispatch queue or a corporate call center.

The name is on the shop, and the shop is down the road. That is the oldest accountability there is. We offer a 90-Day Done Right Promise on every electric gate repair we perform, which is stamped right on your invoice. If it is not fixed right the first time, one call brings me back. We also offer a permanent 10% discount for seniors and veterans, and we never charge a trip fee inside the county. If you have a written estimate from another company, I am happy to give you a free second opinion before you spend your money.

When You Need Electric Gate Repair

Not every gate problem requires a total replacement, but you should know when to stop messing with it and call for help. Electric gates involve high-voltage power and tensioned springs, which can be dangerous if you do not know exactly what you are doing. If you notice these warning signs, it is time to have a professional take a look:

• The gate reverses before hitting an obstruction: This is almost always a safety sensor (photo-eye) issue. In Beverly Hills, we often see these get knocked out of alignment by gardeners or small animals. If the sensors are not perfectly lined up, the gate thinks something is in the way and stops.
• The motor makes a humming or grinding noise but the gate does not move: This usually points to a failing capacitor or a stripped gear inside the operator. If you hear this, stop trying to force the gate open, as you might burn out the motor entirely.
• The gate opens or closes at a crawl: This could be a battery backup issue or a drag problem in the gate track. If the gate is heavy and the motor is struggling, the internal logic board may be cutting power to prevent a fire.
• Intermittent operation or no response to the remote: Before assuming the remote is dead, we check the receiver board. Sometimes, interference from other wireless devices or a corroded antenna connection is the real culprit.
• The gate slams shut or drifts open: This is a mechanical failure in the limit switches or the brake assembly. A gate that does not lock into place is a security risk for your property.

If you are experiencing any of these, please avoid trying to force the gate manually unless it is in “manual release” mode. Forcing a gate that is bound up can damage the hinges and the operator arm, turning a simple repair into a much larger bill. Call (559) 844-6989 and we will walk you through the manual release process or head out to help you ourselves.

Our Electric Gate Repair Process

I have been doing this long enough to know that the right way is rarely the fastest way. When I show up to your home, I follow a consistent process to make sure we fix the root cause, not just the symptom.

1. Visual Inspection and Power Check: We start by checking the power supply and the control board. We look for signs of pest damage, water intrusion, or loose connections that are common in outdoor electronics.
2. Component Testing: We test the safety sensors, the limit switches, and the motor capacitors using a multimeter. This tells us exactly which part is failing, so we do not guess with your money.
3. On-Site Welding and Mechanical Adjustment: If the gate is sagging or the hinge post has shifted, we fix the structure first. A motor cannot operate a gate that is dragging on the concrete. We do this with on-site welding so we do not have to haul your gate away.
4. Calibration and Testing: Once the mechanical and electrical components are repaired, we cycle the gate multiple times to ensure it stops exactly where it should. We adjust the force settings to match the weight of your specific gate.
5. Final Walkthrough: I will show you exactly what we fixed and how to maintain the system to prevent the same issue from happening again. You get our 90-Day Done Right Promise in writing before we pack up our tools.

We are certified to work on nine major brands, including Ghost Controls, Viking, and BFT. If your system is older or a brand we do not carry parts for, I will tell you upfront before we start any work, rather than wasting your time.

Electric Gate Repair Pricing in Beverly Hills

We believe in upfront pricing. You will never see a surprise charge on your invoice when we are finished. Our goal is to provide a fair price for honest work. While every gate is different, our 2026 gate repair cost guide gives you a realistic idea of what you can expect for common repairs in the Beverly Hills area.

Remember that we offer $40 off any repair over $200. If you have already received a quote from another company, call us and ask for a free second opinion. We often find that what one company calls a “total motor replacement” is actually a simple electrical fix that costs a fraction of the price. My name is on the shop, and I have a reputation to protect in this community. I am not interested in selling you a new motor if I can fix the one you have.

FAQs - Electric Gate Repair

Is it cheaper to repair or replace my electric gate motor?

In most cases, it is significantly cheaper to repair the motor, especially if the issue is a capacitor, sensor, or limit switch. We only recommend a full replacement if the internal gears are stripped or the logic board is fried beyond repair and parts are no longer manufactured. Call (559) 844-6989 and we can tell you over the phone if your specific model is worth saving.

Can you fix my gate today?

We offer prompt service for electric gate repairs in Los Angeles, CA, including Beverly Hills. Because we are locally owned and owner-operated, we do not have a massive dispatch list that keeps us across the county. When you call, we will give you an honest window for when we can get to your home, and we stick to it.

Do you work on gates installed by other companies?

Yes, we service all major brands, including Linear, Viking, and BFT, regardless of who installed them. If the gate is standing, we can usually find a way to get it moving again. We focus on the repair, not the politics of who put it in originally.

Why is my gate reversing on its own?

This is usually a safety sensor issue. The photo-eyes that sit at the base of your gate send an invisible beam of light across the driveway. If that beam is blocked by leaves, debris, or if the sensors are just slightly bumped out of alignment, the system assumes the path is blocked and reverses the gate to prevent hitting an object. We can usually fix this with a quick adjustment and a cleaning.

If you are tired of dealing with a gate that does not work or a company that does not answer the phone, give us a call. We have been serving Beverly Hills since 2001, and we plan on being here for a long time to come. Call (559) 844-6989 for a free estimate or to schedule your repair today.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills.