Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Culver City, CA
If your gate is grinding, sagging, or refusing to open in Culver City, the fix usually costs between $150 and $450 for a typical hinge, roller, or alignment job. A full gate motor replacement runs higher, and most repairs in the area are completed the same day we arrive. Call (559) 844-6989 and you’ll get a real person who can tell you honestly whether we can come this afternoon or schedule you for tomorrow morning. We know the difference between a Sunkist Park postwar gate and a gate on a Blair Hills estate, and we bring the right tools for both.
Hal Gatewood started this shop in 2001 because he was tired of watching people get charged for replacements when a weld would have held for another decade. That’s still how we operate in Culver City, and it’s why our home page is full of photos of repairs, not just finished installations.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Culver City Homeowners Choose Gatewood Fence & Gate
You can drive to the shop and look me in the eye. That’s not a line, it’s how I’ve run Gatewood Fence & Gate since the beginning. We publish our address, our license number, and our phone number, and the person who answers at 2 a.m. is a person, not a menu tree. Culver City homeowners call us because the alternative is a national chain that subcontracted the work to someone who has never touched a Viking operator before.
We work regularly in Blair Hills, where the hillside driveways put real stress on gate posts, and in Vets Park, where the older ornamental iron gates need someone who welds on site instead of hauling the gate to a yard. Every job carries our 90-Day Done Right Promise in writing. If the hinge squeaks again or the motor misbehaves, one call brings Hal back. No runaround, no “that’s a different department.”
We’re certified to service Linear, Viking, Ghost Controls, and DoorKing systems, among others. That matters here because Culver City has a surprising number of commercial and studio-adjacent properties running enterprise-grade access panels, and a residential technician who only knows one brand will get lost fast.
Gate Repair Services We Offer in Culver City
Gate Repair
A sagging gate is almost always a hinge-post problem, not a panel problem. We start at the post, weld where welding will actually fix it, and we don’t sell you a new panel when two new hinges will do. Same-day service is typical for most repair calls in Culver City.
Learn more about our Gate Repair in Culver City.
Gate Installation
Whether you’re adding a driveway gate to a new ADU in Blair Hills or replacing a collapsed wood gate near the Culver Studios, we measure, order, and schedule the install with a written price you approve before any work starts. No same-day promises on new installs; this is measured work, not emergency work.
Learn more about our Gate Installation in Culver City.
Gate Motor & Opener
A DOA opener in Culver City is often a capacitor or a limit switch, and we fix those in your driveway. We service Linear, Viking, Ghost Controls, and DoorKing systems, and we carry common parts on the truck so one trip often does it. If your motor has truly failed, we quote a replacement before we touch anything.
Learn more about our Gate Motor & Opener in Culver City.
Gate Access Control
Studio-side Culver City properties often run loop detectors, intercoms, and keypads tied to security requirements that demand someone who understands commercial access panels. Hal handles the wiring, the programming, and the troubleshooting himself, because when a gate won’t respond to a badge at 6 a.m., the call shouldn’t go to a call center.
Gate Parts & Welding
We weld on site, in your driveway, so your gate doesn’t leave the property for days. From broken pickets on a 1950s iron gate to new hinge barrels on a modern steel slider, we carry the stock and the welder to fix it where it hangs. Fix the panel without the post and you’ll fix it twice, so we start at the post every time.
Neighborhoods We Serve in Culver City
We work across Culver City, from the flats near Veterans Memorial Park up into the hills around Blair Hills and the streets west of Overland Avenue. Typical response time for a repair call in the city is same day or next morning, depending on when you call.
- Blair Hills
- Vets Park
- Clarkdale
- Sunkist Park
- McManus
Why Culver City’s Climate & Housing Affect Gate Repair
Culver City sits about five miles from the Pacific, and the marine layer that hangs over the city through the morning leaves salt-laden moisture on metal gate hardware even when the afternoon turns sunny. That humidity works its way into hinges, rollers, and iron pickets faster than it does in inland communities like Baldwin Hills or the Valley. We see rusted-through hinge barrels on 1950s wrought-iron gates in Culver City on a regular basis, and we recommend corrosion-resistant hardware on nearly every residential job here.
The housing stock compounds it. Many of the city’s residential blocks are dominated by 1940s and 1960s ranch and Spanish Colonial Revival bungalows, and a lot of those homes still have their original ornamental driveway and pedestrian gates. Those gates are now 60 to 80 years old, and they need more than a spray of WD-40. They need post re-alignment, new hinge barrels, often a weld repair on the bottom rail, and sometimes a conversation about automating a gate that has been manual for decades.
Pricing for Gate Repair in Culver City
Here’s what repair work in Culver City typically runs, quoted up front and agreed before we start:
- Hinge replacement or tightening: $150-$250
- Roller or track realignment: $175-$300
- Weld repair on iron or steel gate: $150-$400, depending on location and extent
- Gate motor or opener repair: $225-$500
- Full gate motor replacement: $600-$1,400, depending on brand and access
We do not show up with a quote and leave with a different invoice. The number you approve is the number you pay. $40 off any repair over $200, no trip charge inside Culver City, and a permanent 10% discount for seniors and veterans. Call (559) 844-6989 for an exact quote; estimates are free.
Service Area - Cities Near Culver City
We serve the communities around Culver City too. If you’re in Marina del Rey, Beverly Hills, Santa Monica, or West Hollywood, the same crew and the same 90-Day Done Right Promise apply.
Serving Culver City, CA - Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Culver City
Most gate repairs in Culver City run between $150 and $450. Hinge jobs sit at the lower end, motor work at the upper end, and the price is fixed before we start. Call (559) 844-6989 and describe what the gate is doing; we’ll give you a real number over the phone.
For most residential gate repairs in Culver City, yes. If you call before noon, same-day arrival is common. Emergency calls about a gate stuck open or a fallen gate take priority. Call (559) 844-6989 and we’ll tell you honestly whether today works or tomorrow morning does.
A new gate installation includes measure, material order, removal of the old gate if needed, post setting to the correct depth for Culver City soil, hinge and latch installation, and a walk-through of operation and adjustments. You get a written price after the measure, and we don’t start until you approve it. We also handle the power run and safety edges on automated installs.
Yes. When we install an automated gate in Culver City, we handle the electrical feed, the conduit, the loop detector if the driveway calls for one, and the photo eye or safety edge required by manufacturer specs. We don’t leave you to find an electrician after the gate goes in. Ask for Hal when you call (559) 844-6989.
It’s the marine layer. Culver City’s morning fog carries salt-laden moisture that settles on metal and accelerates oxidation faster than you’d see in the Valley or mid-city LA. We see it constantly on the old ornamental gates in Vets Park and Clarkdale, and it’s why we recommend sealed, corrosion-resistant hinges and hardware on every repair we do here. If the rust is through the metal, welding is usually the cheaper and stronger fix than replacing the section.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Culver City since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Culver City Customers Say
"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg