Automatic Gate Repair in Beverly Hills, CA

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

Wrought iron

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Automatic Gate Repair in Beverly Hills, CA

When your automatic gate stops responding in Beverly Hills, it is rarely just a minor inconvenience. It is a security risk that leaves your property vulnerable, and you need a fix that lasts. At Gatewood Fence & Gate, we handle Gate Repair services by focusing on the root cause rather than just swapping out parts. We have been serving the area since 2001, and I personally guarantee our work with a 90-Day Done Right Promise. If you need immediate help, call us at (559) 844-6989. We answer our own phones, and we can often get to your property the same day to troubleshoot your operator, sensors, or alignment issues.

Most issues with automatic gates in Beverly Hills stem from the specific wear and tear caused by our local environment. Whether it is a circuit board failure on a Viking operator or a sensor issue with your Linear system, we diagnose the problem on-site. We don’t believe in hauling your gate away if we can fix it in your driveway. As part of our Gate Repair in Beverly Hills services, we pride ourselves on being the local experts who show up when we say we will. We don’t use call centers or automated dispatch systems. When you call (559) 844-6989, you are talking to the team that will actually be doing the work.

When You Need Automatic Gate Repair

You don’t need a professional to tell you when something is wrong, but knowing which symptoms indicate a deeper mechanical failure can save you time and money. If you notice these signs, it is time to call for a professional inspection:

• The gate moves intermittently or stops mid-cycle: This often points to a failing logic board or a loose connection in the safety loop. In Beverly Hills, we often see this caused by dust and debris buildup in the control box, which can overheat sensitive electronics.
• Grinding or scraping noises during operation: This is a classic sign of gear wear. If you hear metal-on-metal sounds, stop using the gate immediately. Continuing to operate it can strip the gears entirely, turning a simple repair into a full motor replacement.
• The gate fails to close or open via the remote: Before assuming the motor is dead, we check the antenna and the receiver. Sometimes, radio interference in dense residential neighborhoods can cause signal drops, but more often, it is a simple battery or wiring issue we can fix in minutes.
• The gate sags or drags on the driveway: A gate that drags isn’t just a motor problem; it is a structural one. We see this often with heavier iron gates. If the hinge post has shifted, the motor is working double-time to overcome the friction. We fix the hinge and the post first, then adjust the motor settings to match.
• Safety sensors are flashing or ignoring obstructions: If your gate does not stop when you walk in front of it, do not wait. This is a significant safety hazard. We test the photo-eye alignment and replace faulty sensors to ensure your gate stops exactly when it should.

If you see these signs, don’t force the gate. Call (559) 844-6989. We offer free second opinions on any written estimate you have already received, so you can be sure you are not overpaying for parts you do not actually need.

Our Automatic Gate Repair Process

My approach to repair is simple: I treat your gate as if it were on my own property. I have been doing this since 2001, and I have learned that the “quick fix” usually leads to more repair calls later. Here is how we handle your Electric Gate Repair in Beverly Hills:

1. The Site Assessment: We arrive at your home and observe the gate in motion. We watch for alignment issues, listen for motor strain, and check the structural integrity of the posts. A gate that sags in the hinge post needs structural work before the motor can be tuned.
2. Diagnostic Testing: We open the control box to check the logic board and power supply. We test the voltage going to the motor and ensure the safety loops are functioning. If you have a brand like BFT or Ghost Controls, we have the specific technical manuals and experience to troubleshoot those boards accurately.
3. On-Site Welding and Fabrication: Unlike companies that only swap parts, we carry welding equipment on our trucks. If a hinge bracket is torn or a frame member has cracked, we repair the metal right there. This keeps your gate in the driveway and saves you the cost of a full replacement.
4. Component Adjustment and Calibration: Once the structure is sound, we calibrate the motor. We adjust the limit switches and the force sensitivity settings. This ensures the gate opens and closes smoothly without slamming, which extends the life of the entire system.
5. Final Safety Verification: We test the gate through multiple cycles. We verify that the safety sensors stop the gate instantly when triggered. We leave you with the gate working properly and our 90-Day Done Right Promise in writing.

Automatic Gate Repair Pricing in Beverly Hills

We believe in upfront pricing. You should never be surprised by a bill when the work is done. While every gate system is unique, we provide clear estimates based on the specific repair needed. We do not have hidden trip charges inside the county, and we always offer a $40 discount on any repair over $200.

If you have a written estimate from another company, show it to us. We offer free second opinions, and more often than not, we find ways to repair components that others claim need full replacement. Call (559) 844-6989 to speak with us about your gate today.

FAQs - Automatic Gate Repair

How much does it cost to repair an automatic gate in Beverly Hills?

Most automatic gate repairs in Beverly Hills range from $125 for basic sensor adjustments to $650 for major gear or motor component replacements. For a detailed breakdown, see our guide on How Much Does Gate Repair Cost? (2026 Price Guide) - Beverly Hills, CA. We provide an exact price before we start any work, and we offer a $40 discount on any repair over $200. Call (559) 844-6989 for a specific estimate on your gate system.

Can you repair my gate if it is a brand you don’t install?

Yes, we are certified to service nine major brands, including BFT, Linear, Viking, and Ghost Controls, and we have the experience to troubleshoot almost any operator on the market. Our focus is on the mechanical and electrical principles of gate automation, which apply across all brands. If we can get the parts, we can fix the gate.

Is it better to repair my old gate or replace it?

In most cases, we can repair your existing gate for a fraction of the cost of a new installation. We specialize in on-site welding and component-level repair, which saves you from paying for a full system swap. If the gate is structurally sound, we will tell you honestly that a repair is the better investment. Call us for a free second opinion on your gate’s condition.

Do you offer emergency gate repair services?

We answer our phones 24 hours a day, 7 days a week, and we prioritize urgent security issues like gates that won’t close or are stuck in the open position. Because we are locally owned and owner-operated, we don’t have to wait for corporate approval to schedule a visit. Call (559) 844-6989, and we will get someone to your property as quickly as possible.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills.