Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Access Control for Beverly Hills Homeowners
Gate access control in Beverly Hills means one thing: you decide who gets in, and everyone else waits outside. We install, repair, and upgrade keypads, remote systems, phone entry, card readers, video intercoms, and smart access on gates across the 90210 and beyond. Hal Gatewood has been doing this work since 2001, and when you call Gate Access Control in Beverly Hills from Gatewood Fence & Gate, you’ll talk to a live person who can usually be at your property the same day. Call (559) 844-6989 for a free estimate with no trip charge inside the county.
What we see in Beverly Hills most weeks: a keypad that works when the sun is out and fails when it’s foggy, a phone entry system that rings a disconnected landline, or a remote that opens the neighbor’s gate but not yours. None of these need a full replacement. Most need a competent repair, and that’s where we start. The name is on the shop, and the shop is down the road – that is the oldest accountability there is.
What Our Gate Access Control Service Includes
Access control is the brains of your gate. The motor moves the gate, but the access control decides when and for whom. A gate that opens for everyone is just a driveway ornament. A gate that opens for the right people is security. Here’s what we handle in Beverly Hills, including Beverly Hills Gate Access Control. All below sub-services backed by our 90-Day Done Right Promise.
Keypad Entry
A wired or wireless keypad mounted at the gate lets you punch in a code and drive through. It’s the most common access control we install in Beverly Hills because it’s simple, reliable, and doesn’t require a cell phone or a remote that can get lost in a glovebox. We install weatherproof, sun-rated keypads and wire them so they don’t go dead when the temperature spikes in the Sepulveda Pass area. If your keypad has buttons that need a hard press or stopped illuminating at night, we can replace the unit or just the membrane, and you’ll pay only for what’s actually broken.
Remote Control
Remotes are the original gate access control, and Beverly Hills still has thousands of them clicking away. We program replacements for LiftMaster, Linear, and any other brand already on your property, and we can clone a working remote when you need one more. There’s a trick to it: not all “universal” remotes actually work with older receiver boards, and we carry the OEM versions that do. We’ll show you how to delete lost remotes from the system so a stolen clicker doesn’t become an open invitation.
Phone Entry
Phone entry systems let a visitor press a button at the gate and have it ring your house phone, your cell, or both. In Beverly Hills, a lot of these systems are older and still dial a landline that no longer exists, which means guests sit at the gate pressing a button nobody hears. We upgrade those to dial your cell phone directly, and we’ll wire the thing so it works through the property’s existing phone line or a cellular bridge. Same day service is available in Beverly Hills for most phone entry repair jobs.
Card Reader
Card readers make sense when multiple people need gate access: a household with staff, a small HOA, an estate with a caretaker and landscapers. We install proximity readers that let someone tap a fob or card and watch the gate open. Each card gets its own code, so you can add and remove access without changing the system. We’ve pulled out plenty of reader installations from other companies that used indoor-rated components outside – in a rainy Beverly Hills February, that fails. We use outdoor-rated hardware and weather-sealed connections.
Video Intercom
You want to see who’s at the gate before you let them in, and a video intercom does that from your phone or a wall-mounted screen inside the house. We install and wire video intercoms that work with your existing gate operator, showing you a live feed and letting you open the gate from the kitchen, the pool house, or anywhere with cell service. When an older video intercom in Beverly Hills goes dark, it’s often a power supply that died years before the screen did, and we fix that rather than selling you a whole new system. You’ll know exactly what the repair costs up front, before we do any work.
Smart Access
Smart access puts your gate on your phone. You can open it from an app, give a delivery driver a temporary code, or get an alert anytime the gate cycles. We install and integrate smart controllers that play nice with what you already have, including Wi-Fi bridge modules for BFT, Viking, and Ghost Controls operators already on the property. The honest truth from the field: the weakest link in smart access is usually the Wi-Fi signal at the gate, not the controller. We’ll test signal strength before we quote the job so there are no surprises after installation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Access Control
We service BFT access control panels and add-on modules regularly in Beverly Hills, and we’ve seen the full range from original installs in the early 2000s to current WiFi-capable boards. BFT’s outdoor keypads and safety photocells are robust, but their programming menus frustrate a lot of owners, so we’ll handle that part for you. We stock common BFT receiver boards and remotes in the truck.
Linear is the brand we see most often in older Beverly Hills gated driveways, and their receivers and remotes are still dependable if wired correctly. We’ve replaced plenty of Linear access panels where the problem was just a dead transformer or a corroded terminal block. We also work with Viking phone entry and intercom systems, which are popular on multi-tenant and estate properties, and Ghost Controls on gates where the owner wants a modern smart module without replacing the operator. Whether you have one of these or any other make, we can get it running right – and we won’t upsell you a new system when a repair is the honest fix.
Signs You Need Gate Access Control Right Now
- The keypad works intermittently, especially in fog or rain. Beverly Hills gets moisture that sneaks into cracked keypad housings and corrodes the board. Intermittent today means dead next month, and a dead keypad always seems to happen when you’re late and the gate won’t open. We’ll diagnose whether it’s the keypad itself or the wiring running to it before we replace anything.
- You can’t delete old codes or lost remotes from the system. A former housekeeper, a contractor who’s done working, that remote that fell out of the glovebox – if those still open your gate, you don’t have a security gate, you have a gate that’s open to anyone who’s ever worked on the property. This is the most common situation we walk into in Beverly Hills, and we’ll clear old credentials and set up a system you control.
- Guests or delivery drivers can’t reach you at the gate. If the entry panel rings a landline you canceled years ago, or it rings and rings with no way to open the gate remotely, your gate access control has already failed. You just haven’t noticed because people honk or call your cell to get in. That’s a real problem when you’re not home and a package is sitting at the curb.
- The gate opens for codes or remotes you never gave out. After parties, open houses, or renovations, access codes spread faster than people think. If the gate opens for a code you don’t remember creating, or a remote you’ve never seen parked at a neighbor’s house, it’s time to reset everything and start clean. We’ll audit the system and show you exactly who and what has access – then lock it down.
- You want to know who is coming and going, and you can’t right now. Beverly Hills homeowners ask us about this constantly: they’d like a log of gate activity, a way to give a temporary code to a dog walker, or a ping when the gate opens late at night. Older systems don’t do this. A smart access add-on does, and it works with most existing operators, including BFT and Viking systems already installed.
Our Gate Access Control Process – Step by Step
- 1
You call, a live person answers. Not a recording, not a call center. Call (559) 844-6989 any time – literally 24/7 – and someone picks up. We’ll ask what the gate is doing, what brand equipment you have if you know it, and when you need us there. You’ll get a real appointment window and the name of the person who’ll show up.
- 2
We show up on time and start with a full diagnosis. Hal Gatewood or one of his crew will meet you at the gate. We test the access control first, then the wiring, then the operator, because the symptom isn’t always the source. A keypad that “died” might be fine – the operator’s receiver board might be the dead part. We use multimeters and signal meters to find the actual failure before we touch a repair.
- 3
You get a written price before any work starts. No surprises at the door. We’ll tell you exactly what it costs to fix or replace the failed component, what parts we’re using, and how long it’ll take. If the repair is over $200, you get $40 off – every time, no coupon needed. You approve the number, and we start.
- 4
We repair on-site, not in a shop somewhere. Almost every access control job we do in Beverly Hills happens right in your driveway. We solder, wire, program, and test on-site, so you see the work as it goes in. If a part needs to be ordered, we’ll tell you up front and set a return visit. Most common parts – receivers, keypads, transformers, fobs – are in the truck already.
- 5
We test with you, then we stand behind it. Before we leave, you’ll punch the code, click the remote, call the phone entry, whatever applies – and watch it work. Every job carries our 90-Day Done Right Promise in writing: if it’s not done right, we make it right, no runaround. One call brings me back. That’s the whole point of having a name on the shop.
How Much Does Gate Access Control Cost in Beverly Hills?
A typical keypad replacement in Beverly Hills runs $280 to $520 installed, depending on whether we’re replacing just the keypad or the receiver too. For a full breakdown, see our Gate Access Control pricing. Remote programming for an existing system runs $85 to $150 for a service visit plus new remotes, which realistically means $130 to $260 for most homeowners who want us to add and program two remotes while we’re there. A phone entry upgrade that rings your cell phone instead of a dead landline runs $450 to $900 installed, and a full video intercom install usually lands between $900 and $2,400 depending on screen type, wiring distance, and whether you want phone app access.
Smart access upgrades are the broadest range: $180 to $350 for a Wi-Fi bridge module on a compatible operator, and $600 to $1,500 for a complete smart controller retrofit on an older system. What moves the price: wire condition (old underground wire from the house to the gate is the hidden variable), distance from the house, whether the existing operator is compatible, and whether there’s power already at the gate location. The way to avoid overpaying is simple: get a written quote before any work starts, and ask if the failing part can be repaired instead of replaced. We’ll always tell you if a $40 transformer replacement fixes it instead of a $400 board swap. Free estimates are standard – call (559) 844-6989 and we’ll come look, no obligation, no trip charge inside the county.
Gate Access Control Near Beverly Hills – Our Service Area
Gatewood Fence & Gate works all over the Beverly Hills area, including Gate Access Control in Los Angeles and Gate Access Control in Santa Monica. We also routinely service Sherman Oaks, West Hollywood, Brentwood, Studio City, Encino, Tarzana, Van Nuys, Reseda, and North Hollywood. Most Beverly Hills calls get same-day service, and we’ll give you an honest arrival window when you call. For the fastest service near you, call (559) 844-6989 and we’ll get you on the schedule right then.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well, and we also provide Gate Access Control in West Hollywood. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Access Control in Beverly Hills
Gate access control is the system that decides who can open your gate and how: keypad codes, remotes, phone entry, card readers, video intercoms, or a smartphone app. It works separately from the gate motor, which does the physical opening and closing. In Beverly Hills, access control is what turns a gate from a mild inconvenience into actual security, because it’s the difference between anyone driving in and only the people you’ve allowed.
Most keypad, remote, and receiver repairs are finished in under two hours on-site, and most of our Beverly Hills customers have us in and out the same day. A full video intercom or phone entry installation takes half a day to a full day, depending on wiring distance from the house to the gate. We’ll give you a firm time estimate before we start, and we stick to it. Same-day service is available for most repair calls in Beverly Hills and for our Gate Access Control in Studio City.
Expect $280 to $520 for a keypad replacement, $130 to $260 for remote programming with a couple of new remotes, $450 to $900 for a phone entry upgrade, and $900 to $2,400 for a full video intercom install. Smart access runs from $180 up to $1,500 depending on what’s already installed. The exact price depends on your existing wiring, operator brand, and how far the gate is from power and the house. Call (559) 844-6989 for a free estimate – we’ll quote it before any work starts.
Yes, we service BFT and Linear access control equipment regularly, along with Viking, Ghost Controls, and most other major brands. We’ve been inside hundreds of these units over more than 23 years, and we carry the OEM parts and remotes that actually work with them, not just generic knock-offs. Whether it’s an older Linear receiver or a newer BFT phone entry board, we’ll diagnose it honestly and repair rather than replace whenever it’s the right call.
Yes, we answer calls with a live person 24 hours a day, 7 days a week, and we can usually provide same-day emergency service in Beverly Hills when a gate is stuck open, stuck closed, or refusing to open for any code or remote. If your gate is currently stuck open and you need it secured tonight, call us right now at (559) 844-6989.
Every access control repair and installation we do carries the 90-Day Done Right Promise in writing. If something isn’t working right within 90 days, one call brings Hal Gatewood back to make it right at no charge – no arguing, no fine print, no “that’s not covered.” It’s a written promise on every invoice, not a verbal assurance. Parts we install also carry their own manufacturer warranties where applicable, and we’ll help you with any warranty claim.
Have your gate remote, keypad codes, and any existing access control instructions handy if you’ve got them, because that saves us diagnostic time. If you have an older system, write down what the gate is doing wrong and when it started – that’s genuinely useful. You don’t need to be home for the exterior work if you can secure pets and give us gate access, but you’ll want to be there for the final test so you can try every code, remote, and button yourself before we leave. That’s how we make sure you’re satisfied on the spot.
Schedule Your Gate Access Control Service in Beverly Hills Today
Call (559) 844-6989 and talk to a live person who can tell you right away whether same-day service is available in your part of Beverly Hills. You’ll get an honest diagnosis, a written price before any work starts, and a 90-Day Done Right Promise in writing. There’s no trip charge inside the county, seniors and veterans save 10%, and if you’ve got a written estimate from anyone else, we’ll give you a free second opinion. The gate you have is better than the gate you’re being sold – and we’ll prove it.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills since 2001.