Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across West Hollywood
Gate parts and welding in West Hollywood usually means one of three things: a hinge post that’s given out inside an old stucco pillar, a custom gate that needs a fabricated piece nobody stocks, or a motor mount that’s torn loose after a Santa Ana wind event. We fix all three, and we do the welding on site in your driveway. Hal Gatewood has been running this company since 2001, and he’ll be the one who answers when you call (559) 844-6989. A live person picks up, 24/7, and we’ll give you an upfront price before any work begins.
Why Gatewood Fence & Gate Is West Hollywood’s Preferred Gate Parts & Welding Company
Most of our West Hollywood calls come from homeowners who’ve already had someone out once. The gate got a quick patch, or a part got swapped that didn’t need swapping, and three months later the same sag came back. Hal gets genuinely annoyed when he finds sloppy work somebody left behind. A gate sags in the hinge post, not in the middle, and that is where we start. Fix the panel without the post and you’ll fix it twice.
We’re locally owned and owner-operated, with a published address and license number anyone can look up. The name is on the shop, and the shop is down the road, and that is the oldest accountability there is. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print.
West Hollywood is its own city, separate from Los Angeles, with its own Building & Safety department and its own UL 325 compliance inspections. We know that, because we work here. Many Gate Parts & Welding contractors pull LA permits without realizing WeHo is a separate municipality. That oversight becomes a resale liability, full stop. Our crews know which office to file with and which inspector will be signing off on the work.
Our Gate Parts & Welding Services in West Hollywood
Hinge Replacement
Hinge replacement in West Hollywood’s flatlands often means drilling into a 1920s stucco pillar that’s crumbling from the inside. The original ornamental wrought-iron pedestrian gates on Santa Monica Boulevard and the streets around Plummer Park were built into pillars that are now ninety years old. We remove the old hinge, repair the core, and weld new hinge brackets into a reinforced footing so the gate doesn’t lean again. Hinge replacement typically runs $180-$340 per hinge in West Hollywood, including the weld and realignment.
Post Replacement
Post replacement is the biggest job we do in the hillside neighborhoods north of Sunset. A driveway steeper than 20% puts constant lateral load on the hinge post, and when Santa Ana winds hit in October and March, that load spikes dramatically. We cut out the failed post, weld a new steel post into a reinforced concrete core, and re-set the gate operator and safety photocells to spec. In West Hollywood, a post replacement with custom welding and concrete work runs $650-$1,200 depending on access and grade.
Rail Repair
Rail repair on a custom welded gate in West Hollywood usually means a bent or cracked top rail on an ornamental pedestrian gate, or a bottom track that’s rotted out from marine layer moisture. The coastal influence keeps mornings damp along Sunset Strip, and that moisture collects on exposed steel. We cut out the damaged section, weld in new steel, grind it smooth, and match the finish. Expect $275-$500 for a typical rail repair, including on-site welding and paint match.
Custom Welding
Custom welding is where we spend a lot of our time in the Bird Streets and the hillside estates above the Strip. Off-the-shelf gate hardware rarely fits these driveways, because the grades are sharp, the gate spans are wide, and the original construction was often custom. We fabricate extension plates, articulating arm mounts, latch strikes, and ornamental inserts to match. Hal does the welding himself on many of these jobs. Custom welding typically runs $120-$200 per hour plus materials in West Hollywood, and we quote the full job before we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Hollywood
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In West Hollywood we see a lot of BFT and FAAC operators on the hillside custom gates, plus a good number of Viking and Linear units on older flatland apartment gates. Because we stock local parts for these brands, we can usually get a repair done in a single trip instead of ordering and waiting. That matters when your gate is the only thing between the street and your courtyard.
Common Gate Parts & Welding Problems We See in West Hollywood Homes
- Santa Ana wind shear on 1920s pillars: Gusts hit hillside swing gates hard, and the hinge-post anchor bolts inside old stucco pillars are the weakest point. We regularly find bolts sheared off clean inside the pillar, with the gate misaligned and dragging on the latch side.
- Marine layer corrosion on slide gate tracks: Morning moisture along Sunset Strip and the flatlands collects on bottom rollers and rack-and-pinion tracks, causing jerky operation and motor overload trips. We replace the rollers, weld the damaged track sections, and coat the new steel against the next season.
- Articulating arms past rated duty cycle: On Bird Streets driveways steeper than 20%, swing gate openers work their articulating arms harder than the manufacturer intended. Post brackets wear out within two seasons if they weren’t spec’d for the grade. We weld in heavy-duty mounts rated for the actual slope.
- Crumbling pillar cores under ornamental gates: The 1920s-1940s Spanish Colonial apartment buildings in central West Hollywood have beautiful original wrought-iron gates sitting in stucco pillars that have lost their core. Hinge screws strip out because there’s nothing left to bite. We core out the pillar and weld in a steel sleeve before hanging the gate again.
Pricing for Gate Parts & Welding in West Hollywood, CA
Gate parts and welding prices in West Hollywood run slightly higher than the county average because of the hillside access challenges and the age of the housing stock. Hinge replacement runs $180-$340 per hinge. Post replacement runs $650-$1,200. Rail repair runs $275-$500. Custom welding runs $120-$200 per hour plus materials. Slide gate roller replacement with track welding typically runs $350-$600.
What moves the price: driveway grade, how deep the pillar damage goes, whether we need to core out concrete, and access for the welding rig. We will quote the full job before any work starts, and that price is what you pay. No trip charge inside the county. We also offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (559) 844-6989 and we’ll give you a real number.
We Also Serve Cities Near West Hollywood
We work regularly in Beverly Hills, Studio City, North Hollywood, and Sherman Oaks, and we’re familiar with how each city handles gate permits and inspections. If you’re in one of those areas and need Gate Parts & Welding in West Hollywood level craft, give us a call. The same crew, the same 90-Day Done Right Promise, the same upfront pricing.
Serving West Hollywood, CA - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in West Hollywood
Because West Hollywood is its own incorporated city, just 1.9 square miles, with its own Building & Safety department, so automated gate work must pass WeHo’s UL 325 safety compliance inspection, not Los Angeles’s. Hinge replacement on an automated gate alters the gate’s travel geometry, which means the safety photocells and entrapment sensors must be re-verified under UL 325 after the weld is done. If you skip that step, the repair is unpermitted and can void your property’s certificate of occupancy at resale. We handle the inspection paperwork as part of the job. Call (559) 844-6989 to talk through your situation.
Yes, and it’s one of the more satisfying jobs we do. The original wrought-iron pedestrian gates on the Spanish Colonial and Mediterranean apartment buildings in central West Hollywood have scrollwork and spear points that aren’t manufactured anymore. We weld in custom forged inserts to match the original pattern, then grind and finish the joint so the repair blends in. We’ll quote the full job before we start, and the work carries our 90-Day Done Right Promise.
Santa Ana winds put severe lateral stress on swing gates in the Bird Streets because the driveways are steep and the gates are wide and heavy. The wind gusts in fall and early spring push the gate like a sail, and the hinge-post anchor bolts inside old stucco pillars shear off. We’ve replaced hinges on Hillside Avenue and along Sunset Plaza Drive after wind events more times than we can count. If your gate starts dragging on the latch side after a Santa Ana event, the post bolts are likely already gone. Call us and we’ll come look.
For most roller replacements and track welding, no permit is required, because you’re restoring the gate to its original operation rather than altering the automated system. That said, if the gate’s safety edges or photocells are affected by the track weld, the work may trigger a UL 325 compliance check under WeHo’s separate Building & Safety process. We’ll tell you during the quote whether your specific job needs an inspection, and we handle the paperwork either way.
A steep Bird Streets driveway needs a hinge post rated for the actual grade and the gate’s full wind load, not a standard post from a catalog. We weld a thicker-wall steel post into a reinforced concrete core and spec the articulating arm mounts for the slope, so the opener isn’t fighting the grade with every cycle. If a gate company quotes you an off-the-shelf post for a 900-pound gate on a 20% grade, the hinges will be worn out in two seasons and the post will pull out in three. That’s not our opinion, that’s what the engineering says.
Call Gatewood Fence & Gate for Gate Parts & Welding in West Hollywood
If you’ve got a gate that’s sagging, dragging, or making noise it shouldn’t, call Hal at (559) 844-6989. You’ll get a real person, a free estimate, and a written price before any work starts. We’ve been fixing gates since 2001, and we stand behind every weld with our 90-Day Done Right Promise. Whether you’re in the flats around Plummer Park or up a hill in the Bird Streets, we’ll come see what’s going on. The name is on the shop, and that means something.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving West Hollywood since 2001.