Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Marina del Rey
If you live in Marina del Rey, you already know the real story about your gate: the salt air off the harbor is eating it. Hinge pins seize, post footings crack, and control boards corrode faster than any manufacturer’s warranty expected. That’s the problem we solve. Gatewood Fence & Gate has been owner-operated since 2001, and our Gate Parts & Welding work happens on site, in your driveway or parking garage, so the gate stays where it belongs. Call us at (559) 844-6989 and we’ll get someone out to Marina del Rey fast.
Why Gatewood Fence & Gate Is Marina del Rey’s Preferred Gate Parts & Welding Company
We work on gates in Marina del Rey differently than most shops do. A lot of companies will take one look at a rusted hinge post on a 1970s condo gate off Admiralty Way and write up a full replacement quote. We don’t. Hal Gatewood started this shop in 2001, and the rule he runs on hasn’t changed: repair what’s repairable, replace only what’s actually failed, and weld it on site so you can watch the work happen.
There’s a reason Marina del Rey calls us back for second and third jobs. We show up when we say we will. The person who answers the phone at 2 a.m. works for this company, not a call center three states away. And every job we finish in Marina del Rey carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. No fine print, no runaround.
Our Gate Parts & Welding Services in Marina del Rey
Hinge Replacement
Hinges on Marina del Rey gates take a beating from the marine layer. We see hinges that look fine on the outside but have frozen solid or rusted through at the pin, especially on pedestrian gates facing the water off Via Marina. We cut out the old hinge, weld in a new one rated for salt exposure, and re-hang the gate so it swings true. For most residential hinge replacements in Marina del Rey, you’re looking at $220 to $480 per hinge, depending on gate weight and how much repair the surrounding steel needs.
Post Replacement
This is the job we do more of in Marina del Rey than anywhere else along the coast. Original gate posts on those 1960s and 1970s harbor-era complexes were poured before modern wind-load standards existed. Add forty years of salt working its way into the concrete and you get posts that lean, crack, and throw off the entire gate geometry. We dig out the old footing, set a new post in marine-grade concrete, and weld the gate frame back into position. Plan on $600 to $1,400 for a typical driveway gate post replacement, more for large slide-gate posts at commercial entries.
Rail Repair
Slide gates along Washington Boulevard and Admiralty Way run on rails that rust from the bottom up. Salt spray settles into the track channel, and before long the gate grinds instead of slides. We cut out the pitted rail sections, weld in new steel, and true up the track so the rollers don’t fight the gate. Minor rail repair runs $180 to $350. A full rail replacement on a long commercial slide gate can run $900 to $2,200, depending on length and access.
Custom Welding
Sometimes the part you need doesn’t exist anymore. A lot of Marina del Rey gate hardware is replacement-of-a-replacement at this point, and the original manufacturer stopped making brackets, hinge plates, or rack sections years ago. We fabricate what’s needed on site. Custom brackets, reinforcement plates, gate frame extensions, motor mounting plates. Custom welding jobs typically run $250 to $800 depending on complexity and materials. We quote the price before we strike an arc, and that’s the price you pay.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Marina del Rey
We’re certified to service nine major gate brands, and in Marina del Rey we handle three of them constantly: BFT, Linear, and Viking. Those are the workhorses wired into most of the condo and apartment gate systems around the harbor. We keep common parts for these brands stocked on our trucks so we’re not making you wait on a shipment from across the country. When we quote a job in Marina del Rey, the quote includes the brand-specific parts, not generic substitutes.
Common Gate Parts & Welding Problems We See in Marina del Rey Homes
Here’s what we actually run into on Marina del Rey jobs, week after week:
- Hinge posts rusted from the inside out. The salt air penetrates the weld points where the hinge plate meets the post. By the time the gate starts sagging, the post is usually hollow inside. You can’t patch it. The post needs to come out.
- Obsolete Viking and Deano control boards shorting out. Salt film builds up on low-voltage terminals during foggy nights, and the board starts throwing faults that look random. Sometimes it’s a bad board. Just as often it’s the terminals and the loop detector. We test before we replace.
- Rack and pinion wear on slide gates. That grinding sound on a foggy morning off Fiji Way is the rack stripping itself against a misaligned pinion. Once the rack teeth go, the motor strains, the board overheats, and you’re replacing three things instead of one.
- Pedestrian gate rollers frozen from corrosion. Swing gates near the water with steel rollers seize up in months. We replace them with sealed, marine-rated roller bearings and re-align the gate so it doesn’t drag.
Most of these problems are predictable. Marina del Rey gates fail the same way, in the same order, because the salt load here is relentless. Knowing the pattern means we diagnose faster and we don’t sell you work you don’t need.
Pricing for Gate Parts & Welding in Marina del Rey, CA
Let’s talk numbers, because that’s what matters when you’re deciding between repair and replacement. In Marina del Rey, typical gate parts and welding work falls into these ranges:
- Hinge replacement: $220 to $480 per hinge
- Post replacement (residential driveway gate): $600 to $1,400
- Slide gate rail repair: $180 to $350
- Custom welding and fabrication: $250 to $800
- Control board replacement (including programming): $300 to $750
What drives the price is gate size, how much of the surrounding steel is compromised, and whether the job is a condo complex with an HOA approval process or a single-family home where you make the call. We give you the price in writing before we start. If the scope changes, we talk about it and you approve it first. You never open a surprise invoice from us.
We also make it easier to move forward. Take $40 off any repair over $200. Free second opinion on any written estimate you’ve received. No trip charge inside the county. And a permanent 10% discount for seniors and veterans. Call (559) 844-6989 for a free estimate.
The Marina del Rey Permitting Reality Most Contractors Get Wrong
Here’s something that matters specifically to Marina del Rey, and it’s the kind of thing that stalls a job if your contractor doesn’t know it: Marina del Rey is unincorporated Los Angeles County. It is not the City of LA. That means gate and fence permits run through the LA County Department of Building and Safety, not LADBS. We’ve seen out-of-area contractors file with the wrong agency and sit waiting for an approval that never comes. On larger apartment and marina-access gate projects, the wrong permit path can set a repair back weeks. We handle the county paperwork the right way the first time, because we work here often enough to know the difference.
At a gated condo complex off Admiralty Way last winter, our crew found a Viking slide gate hanging on its original hinge post. The rack and pinion were stripped, and the loop detector was shorting out from salt-caked terminals. We pulled the post, welded in a new post footing, replaced the rack, and sealed the new loop detector in a marine-grade enclosure. The gate now cycles cleanly instead of grinding and dropping offline on foggy mornings. That’s the kind of repair that should have been done right the first time, decades ago. We got it done in a day.
Do You Need a Full Replacement? Honest Answers for Marina del Rey
We don’t sell replacements for the sake of selling replacements. But some Marina del Rey gates are past the point where welding makes financial sense. If the post is rusted through below grade in three places, or the gate frame itself is paper-thin with corrosion, or the operator is a 1980s board that no replacement part exists for, you’re looking at recurring $500 to $1,200 repairs every year. At that point, a properly specified replacement gate with marine-grade steel and a modern operator costs less over five years than nursing the old one. We’ll tell you which situation you’re in, and we’ll show you the math either way. No pressure. We just give you the honest answer, because our name goes on every invoice.
Marina del Rey’s older gates and legacy operators are at the end of their second service life. Control boards are obsolete, posts are tired, and hinges weren’t built for this environment. Some of it can be retrofitted. Safety photocells, newer loop detectors, and keypad entry can be added to older FAAC and BFT operators without ripping everything out. We do those retrofits regularly. But a gate post that’s rusted through from the inside is done. You can’t weld to powder.
We Also Serve Cities Near Marina del Rey
Our Gate Parts & Welding in Marina del Rey coverage extends to the surrounding Westside communities. We regularly work in Culver City, Santa Monica, Beverly Hills, and West Hollywood. If you’re just outside Marina del Rey, call us and we’ll let you know how soon we can get there.
Serving Marina del Rey, CA - Our Local Coverage Area
We’re based in the Marina del Rey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Marina del Rey
If the post is rusted through on the inside, welding a patch won’t hold, and you’ll be paying for the same repair again in a year. Marina del Rey slide gates from that era were often hung on posts that weren’t galvanized or sealed against salt air. We’ll cut an inspection window and show you what’s actually inside the post before we recommend anything. If the post is still solid, we’ll weld the bracket, re-hang the gate, and charge you for a repair, not a replacement. Call (559) 844-6989 and we’ll come look.
It depends on the scope. Most straight repair work - welding a hinge, replacing a roller, patching a rail - doesn’t require a permit. Replacing a gate post at a multi-family complex or changing the gate’s dimensions or operator placement does, and in Marina del Rey that permit runs through the LA County Department of Building and Safety, not LADBS. We handle the filing when it’s needed and tell you upfront if your job requires one.
Both are common in Marina del Rey, and they look identical. Salt film on low-voltage terminals can cause intermittent faults that clear when the sun dries things out. A failing loop detector does the same thing but gets progressively worse. We test the loop first, because replacing the board without addressing the loop or the terminal corrosion means you’ll be back here in six months. A typical board replacement in Marina del Rey runs $300 to $750, and loop detector replacement is $250 to $500.
Yes, and this is one of the retrofits we do most often at Marina del Rey’s older condo complexes. Modern photocells, keypads, and phone-entry systems can interface with legacy FAAC operators in most cases. We’ll wire in the new safety edges and test everything to current standards. Retrofitting is almost always cheaper than replacing the operator, and it satisfies the HOA’s safety requirements without a full tear-out. Estimates are free - call (559) 844-6989.
Often the rollers alone can be replaced, and that’s a $150 to $400 job depending on the gate. But if the hinge side is also corroded - and near the marina it usually is - you may need hinges too. We’ll assess both sides while we’re there. We don’t quote you for work you don’t need. And every job carries the 90-Day Done Right Promise, so if those new rollers start binding, we come back.
Call Us for Gate Parts & Welding in Marina del Rey
Whether it’s a sagging condo gate off Admiralty Way, a seized hinge on a pedestrian gate near the marina, or an obsolete operator that needs honest advice, we’ll give it to you straight. The name is on the shop, and the shop is down the road. Call (559) 844-6989 for a free estimate, and we’ll come out to Marina del Rey and look at your gate in person.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Marina del Rey and the surrounding communities since 2001.