Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Culver City
Gate installation in Culver City runs $2,800 to $9,500 for most residential jobs, with sliding driveway gates on shared driveways landing between $4,200 and $7,800 and pedestrian gates starting around $1,200. We’re on-site in Culver City most days of the week, and we answer the phone with a live person around the clock. If you’re staring at a rusted hinge post off Washington Boulevard or a driveway gate that won’t clear the curb anymore, call (559) 844-6989 and Hal will talk you through what you’re actually dealing with before anyone sets foot on your property.
We’ve been at this since 2001, and Culver City’s mix of 1940s bungalows, shared driveways, and studio-adjacent security demands has taught us things a generic gate company simply never learns. The marine layer off the Pacific gets into everything. The right-of-ways are tight. And when a gate has to keep production vehicles moving off Jefferson Boulevard while you’re still swinging it closed, the spec matters. That’s the work we do here.
Why Gatewood Fence & Gate Is Culver City’s Preferred Gate Installation Company
Culver City homeowners tend to be skeptical of gate companies. A lot of you have already had a national outfit quote one price on the phone and then hand you a different invoice at the door. That’s not how we operate, and it never has been. Hal Gatewood’s name is on the shop, the address is published, and the license number is there for anyone to look up. You can drive to the shop and look him in the eye if you want to. That’s the oldest accountability there is.
We carry a 90-Day Done Right Promise on every job, stamped in writing. If it’s not done right, one call brings us back. No runaround. No hedge language. We also answer our phones with a live person, 24/7. Not a voicemail, not a call center three states away, not a chatbot. When you call about a gate install in Culver City, you’re talking to someone who knows what a split-level in Blair Hills looks like and why the driveway there doesn’t have room for a full swing arc.
Our crews are background-checked, uniformed, and trained on nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Culver City because so many of the older homes still run original Linear or FAAC operators that a newer tech won’t recognize. We do.
Our Gate Installation Services in Culver City
Driveway Gate Installation
Driveway gates in Culver City almost always mean working with a shared driveway or a narrow setback. The 1940s and 1950s ranch homes along streets like Cardiff Avenue and Higuera Street were built when one car per household was normal. Today those driveways handle two or three vehicles, a delivery van, and maybe an ADU tenant. We spec driveway gates that leave enough clearance for a car door to open without scraping the gate track, and we check the hinge post footing depth before we quote anything. A gate sags in the hinge post, not in the middle, and that’s where we start.
Pedestrian Gate Installation
Pedestrian gates in Culver City are often the original ornamental wrought iron from the 1950s, and by now the hinge posts have typically rotted from the inside out. Salt-laden morning moisture off the Pacific sits on that hardware for hours, even on sunny days. We install new pedestrian gates with corrosion-resistant hardware and post footings rated for the soil conditions here, not whatever was on the shelf. If you’re adding a pedestrian gate next to an ADU, we’ll match the setback requirements so the gate doesn’t bind on the retaining wall or block the required walkway.
Sliding Gate Installation
Sliding gates are the workhorse of Culver City. When a swing gate won’t clear the curb or would arc over a neighbor’s property line, a slide gate is usually the right answer. The catch is that a slide gate needs a straight, level run, and Culver City’s tight right-of-ways don’t always provide one. We’ve installed rack-and-pinion slide gates on shared driveways off Washington Boulevard where the gate had to run parallel to a retaining wall with eleven inches of clearance. That’s not a stock install. The rack strip has to be corrosion-resistant, the operator has to hold up to salt-laden moisture, and the loop detector has to play nice with whatever access-control panel is already there.
Swing Gate Installation
Swing gates are common on Culver City’s Spanish Colonial Revival bungalows, especially in neighborhoods like Sunkist Park and Blanco-Veterans Park where the lot lines are wider than the streets. But a swing gate spec’d without checking the hinge post footing clearance will bind on the curb or strike a parked car. That’s the kind of mistake we see from crews who don’t work this area regularly. We measure the swing arc against the actual curb, the parked-car line, and the property boundary before we order a single piece of steel.
We also handle double gate setups for wide driveways and security gate installs where the priority is keeping a production truck or a delivery van from backing into the wrong driveway. Our Gate Installation team handles the full scope, from post footings to operator wiring to safety edges.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Culver City
We’re certified to service and install LiftMaster, FAAC, BFT, Linear, and five other major gate brands, and we stock common parts for Culver City jobs so you’re not waiting on a shipping delay from a distributor. The older Linear and FAAC operators you still see on 1960s-era Culver City gates are units we know well. If a BFT operator makes more sense for your slide gate because of the marine layer exposure, we’ll tell you why. We don’t push a brand because we have inventory. We push the brand that will still be running in five years, five miles from the ocean.
Common Gate Installation Problems We See in Culver City Homes
- Rust-jacked hinge posts snap during installation. Sixty-year-old iron posts next to the marine layer rot from the inside out. You can’t see the damage until we pull the old gate off, and then the post crumbles. We plan for that on every Culver City install.
- Slide gates stall on salt-coated rack strips. The rack and pinion strip on a slide gate catches airborne salt from the morning marine layer. Ordinary steel teeth corrode fast. We use corrosion-resistant rack strips and tell you exactly how to keep the track clean.
- ADU-driven installs bind on the required pedestrian path. Culver City’s ADU boom means new gates going onto lots that never had them. When the swing arc overlaps a required walkway, UL 325 entrapment protection trips constantly. The operator has to be positioned so the arc stays clear.
- Commercial installs near Culver Studios fail permit inspection. The gate operator isn’t compatible with the existing loop detector and access-control panel from a previous tech. We check that integration before we install, so the inspection passes the first time.
Pricing for Gate Installation in Culver City, CA
Here’s what you’re looking at for a typical residential gate installation in Culver City:
- Pedestrian gate: $1,200 to $2,800, depending on width, ground conditions, and whether the post footings need to be re-poured
- Single swing driveway gate: $2,800 to $5,600, including operator and basic access-control wiring
- Sliding driveway gate: $4,200 to $7,800, corrosion-resistant rack strip, loop detector, and operator included
- Double driveway gate: $5,500 to $9,500, two leaves, synchronized operators, safety edges on both
- Security gate with full access-control panel: $6,000 to $11,000, depending on panel type and intercom integration
The price you’re quoted is the price you pay. We don’t do the phone-quote bait and switch, and we’ve never done it. Every quote includes the post footings, the hardware, the operator, and the labor. If we find something unexpected when we pull the old gate off, we stop and show you exactly what we found before any additional work happens. No trip charge inside the county, and standing offers: $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
For an exact quote on your Culver City property, call (559) 844-6989. Estimates are free, and you’ll get the number before we start, in writing.
We Also Serve Cities Near Culver City
If you’re just across the border in Marina del Rey, Beverly Hills, Santa Monica, or West Hollywood, we handle gate installation there too. The marine layer doesn’t stop at the city line, and neither do the rusted hinge posts. Learn more about our work throughout the area on our Gate Installation in Culver City page, or call and tell us what street you’re on. We probably know the block.
Serving Culver City, CA - Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Culver City
Because the original iron hinge posts next to the marine layer have rotted from the inside out, even if the gate panel itself still looks fine. Salt-laden morning humidity off the Pacific sits on that hardware for hours daily, and after sixty years the post is often flaking rust internally. We won’t hang a new gate on a compromised post. We reset both hinge posts with deeper footings and corrosion-resistant hardware before the new gate goes on. That’s why our quotes often include post work even when the customer originally asked for just a gate swap. Call (559) 844-6989 and we’ll check your posts before quoting anything.
No. A swing gate cannot arc over a neighbor’s property line without written easement permission, and even then it’s a bad idea on a shared driveway. Your neighbor’s car, their delivery, their right-of-way access all get blocked or clipped by the swing arc. On shared driveways in Culver City, a slide gate is almost always the correct answer. It runs parallel to the driveway, needs no swing clearance, and doesn’t intrude on the neighbor’s side at any point in its travel. If you’re not sure which one fits your shared driveway, call us and we’ll tell you straight. The estimate’s free.
It accelerates oxidation on rollers, hinges, rack strips, and iron pickets faster than almost anywhere in LA County. The marine layer sits over Culver City through the morning, depositing salt-laden humidity on metal surfaces even on clear days. Ordinary zinc-plated hardware starts showing rust within the first season. That’s why we spec stainless or corrosion-coated hardware on every Culver City install, and why we tell homeowners to rinse their gate track twice a month if it’s within sight of the ocean breeze. The extra thirty seconds of maintenance saves a $400 rack strip replacement.
You need a loop detector on any slide gate that vehicles pass over, residential or commercial. If you don’t have one, the gate won’t know when a car is sitting in its path, and the safety system has to rely entirely on photocells. On a Culver City shared driveway where cars back in and out constantly, a loop detector is the single best safety upgrade you can make. It’s standard on our slide gate installs, not an add-on we upsell. For commercial gates near Culver Studios or Sony, the loop detector also has to integrate with the existing access-control panel, which we check before installation so the permit passes.
Sometimes, but it depends on how much straight, level run you actually have. A slide gate needs roughly the gate’s width plus a few extra feet of track to fully open. If your Culver City driveway has only a few feet of setback from the sidewalk, we may need to run the gate behind the front wall line or adjust the operator mount. In cases where there’s genuinely no room, a compact swing gate or a vertical pivot gate might be the better fit. We measure the actual run and the actual curb before we quote, so you don’t get surprised mid-install. Call (559) 844-6989 and we’ll come out and take measurements for free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Culver City and the surrounding communities since 2001.