Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Hollywood
Gate installation in North Hollywood typically runs $1,800 to $6,500 for a full driveway gate with automation, and most standard installations are completed within one to two days of the measured site visit. That’s the straight answer. We’re Hal Gatewood’s company, Gatewood Fence & Gate, and we’ve been building and hanging gates since 2001. If you’re on a street off Burbank Boulevard or tucked into one of the apartment blocks south of Oxnard, call (559) 844-6989 and a live person answers, day or night. No voicemail, no call center. Just us.
Why Gatewood Fence & Gate Is North Hollywood’s Preferred Gate Installation Company
Homeowners in North Hollywood call us because they want a real person to show up, look at the driveway, and tell them what actually needs doing. Hal Gatewood has been at this since 2001, and his name is on the invoice, the shop, and the promise. We don’t sub out the work and we don’t send a rotating cast of strangers. The person who answers when you call is the same crew that welds your hinges on site, in your driveway, not at some warehouse forty miles away.
We answer the phone 24/7. That matters in North Hollywood, where a gate that won’t close on a Saturday night is a real problem. We keep local parts stocked for this area, including LiftMaster, FAAC, and BFT components, so we’re not waiting on a truck from Texas. Every job carries our 90-Day Done Right Promise, in writing. If it’s not done right, one call brings Hal back. That’s not marketing. That’s the way we’ve run this business for over two decades.
Crews serving North Hollywood are coordinated from our Los Angeles office, but these are local techs who know the streets, the housing stock, and the specific ways Valley heat and Santa Ana winds chew through gate hardware. You can see reviews from North Hollywood homeowners, and one thing comes up over and over: we do what we said we’d do, for the price we said, and we show up when we said we’d show up.
Our Gate Installation Services in North Hollywood
Driveway Gate Installation
A driveway gate on a North Hollywood bungalow or apartment building isn’t just curb appeal. It’s how you keep cars from turning around in your driveway and how you keep solicitors off the porch. We install steel, aluminum, and wrought-iron driveway gates sized to your opening, with operators matched to the gate’s weight and your usage pattern. On the dingbat-era apartment blocks off Lankershim and Magnolia, we commonly replace rotted posts and rebuild the footing before hanging anything new. A gate sags in the hinge post, not in the middle, and that’s where we start.
Pedestrian Gate Installation
Pedestrian gates in North Hollywood’s 1940s-to-1960s bungalow districts are often the original steel or wood frames, now rusted at the latch and dragging on the sidewalk. We build and hang new pedestrian gates with stainless steel hinges and latches, and we’ll set the post plumb so the gate swings true. If you’ve got a matching driveway and pedestrian gate, we’ll keep the style consistent, including the powder-coat finish.
Sliding Gate Installation
Sliding gates suit the tighter frontages on North Hollywood’s apartment corridors and the commercial mixed-use lots along the NoHo Arts District’s Lankershim corridor. We install cantilever and track-style slide gates, and we do the rack and pinion operators too. Last October, on a 1970s stucco apartment complex off Burbank Boulevard near Lankershim, we replaced a failing Viking slide gate operator that had been retrofitted in 2003. The motor had burned out after years of fighting a warped steel gate, so our tech installed a new LiftMaster operator with rack and pinion drive, added a loop detector and safety photocells, and reinforced the hinge post footing. The gate now cycles smoothly and meets UL 325 entrapment protection.
Swing Gate Installation
Swing gates are the most common style on North Hollywood’s single-family bungalow blocks and on many of the older apartment buildings. We install single and double swing gates with proper post footings, heavy-duty hinges, and automation matched to gate weight. Given the Santa Ana winds that rip through Valley corridors each fall, we spec thicker wall tubing than the original 1960s-1980s gates and anchor posts deeper than the bare minimum. Weak latches and shallow footings are the two biggest reasons we see swing gates torn off their posts every October and November.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Hollywood
We’re certified to install and service LiftMaster, FAAC, and BFT operators, among others. For North Hollywood customers, we keep common control boards, remotes, photo eyes, and drive parts in local stock, so we’re not waiting on a distributor in Phoenix when your operator fails on a Friday. If you’ve got an existing gate and a dead operator, we’ll usually retrofit a new LiftMaster or FAAC unit onto the old gate frame instead of selling you a whole replacement. Hal would rather fix the panel without replacing the post. It’s cheaper for you and it’s honest work.
Common Gate Installation Problems We See in North Hollywood Homes
- Heat-fatigued hinge welds: The San Fernando Valley’s inland basin pushes summer highs past 100°F. Those thermal expansion-and-contraction cycles warp metal gate frames and fatigue hinge welds at a rate up to 30% faster than coastal LA. Over 60% of our local installation callouts involve retrofitting thick-walled tubular steel and stainless hinges to replace original 1960s-1980s wrought iron.
- Salt-air corrosion on ungalvanized steel: Coastal breezes reaching the Valley through the Sepulveda Pass carry enough salt to attack ungalvanized steel gates within 5-7 years. Hinge posts rust through at the base and weld joints crack. We spec galvanized steel or aluminum with stainless fixings for North Hollywood installs, not raw painted steel.
- Failed retrofitted operators from the early 2000s: On the dense stucco apartment blocks south of Oxnard Street, original gate operators from the early 2000s have failed while the iron gates remain structurally sound. The call is usually operator and control board replacement rather than full gate panel work. We stock these parts locally.
- Santa Ana wind damage to posts and latches: Each fall, the winds funnel through the Valley and rip weakened or improperly latched swing gates off their posts. We see a 40% spike in emergency installation calls for post footing reinforcement in October and November. Deeper footings and reinforced posts are standard on our North Hollywood installs, not an upgrade.
Pricing for Gate Installation in North Hollywood, CA
Here’s what our Gate Installation work actually costs in North Hollywood right now. A basic single swing driveway gate with manual open runs $1,800 to $2,800 installed. A solid automated swing gate runs $2,800 to $6,500 depending on size, material, and operator. A pedestrian gate alone is $600 to $1,400. A slide gate with motor and rack typically lands between $3,200 and $7,000 for a standard driveway width. These are installed prices, not parts-only quotes. The price we quote is the price you pay, agreed before any work starts. We don’t add a surprise line item at the door. Call (559) 844-6989 for a free site measure and a written number you can hold us to.
We Also Serve Cities Near North Hollywood
If you’re in Studio City, Van Nuys, Sherman Oaks, or West Hollywood, Hal’s crew covers your neighborhood too. We know the whole San Fernando Valley and the surrounding LA basin, and we’ll give you the same straight-talk pricing we give our North Hollywood customers. Gate Installation in North Hollywood is our specialty, but we’re on your street too.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in North Hollywood
North Hollywood sits deeper in the San Fernando Valley’s inland basin, where summer heat builds and bakes through the day. That heat stress opens micro-cracks in paint and powder-coat, letting moisture and the coastal salt air that comes through the Sepulveda Pass reach bare steel. Once the protective coating fails, rust sets in fast. In Studio City and Toluca Lake, cooler evening temperatures and slightly different wind patterns mean less thermal cycling and less salt exposure. The fix is stainless steel hinges and galvanized or aluminum gates, which we standardize on for North Hollywood installs.
Most standard driveway and pedestrian gate replacements in North Hollywood don’t require a city permit, but if you’re moving the posts, widening the opening, or adding electrical runs for a new operator, LA city code may trigger a permit review. Automated gates also need to meet UL 325 safety standards, which cover entrapment protection like photocells and loop detectors. We handle code-compliant installs and will tell you honestly if a permit applies to your specific project before we start, not after. Call (559) 844-6989 and describe your setup, and we’ll give you an honest answer.
In most cases on North Hollywood’s older apartments and bungalows, yes, you can keep the iron gate and replace only the operator and control board. We do this constantly on the stucco blocks south of Oxnard Street, where the gates are structurally sound but the early-2000s LiftMaster or Viking operators have died. We mount the new operator, replace the control board, add safety photocells if needed, and you’re done. If the gate itself is rusted through at the hinges or the posts are rotted, we’ll tell you that plainly, and we’ll only recommend replacing what actually needs replacing. Call for a free estimate on an operator retrofit at (559) 844-6989.
Santa Ana winds hit North Hollywood every fall, funneling through the Valley and slamming into gates with enough force to rip a weakened swing gate off its posts. We see a 40% spike in emergency installation calls in October and November. The fix we build in from day one: deeper post footings, thicker-walled gate posts, properly sized hinges, and wind-rated latches. If you’re replacing a gate that already survived a few Santa Ana seasons, we’ll match or exceed its post depth, not cut it back to the minimum.
For North Hollywood’s heat-plus-salt-air combination, galvanized steel is our default for driveway and pedestrian gates. The zinc coating handles the summer temperatures and shrugs off the salt that blows through the Sepulveda Pass, and it won’t warp like ungalvanized steel. Aluminum is a good choice when you want no rust risk at all and a lighter gate, though it resists dents less than steel. Painted steel without galvanization is what most 1960s-1980s gates were built from, and we don’t spec it for new installs because it corrodes within a few years here. Call (559) 844-6989 and we’ll walk you through the material choice for your specific opening and budget.
Get Your Gate Installation Started in North Hollywood
Hal Gatewood has been building, hanging, and fixing gates since 2001, and his name is on the shop. We’re locally owned, owner-operated, state-licensed, and insured. Free estimates, upfront pricing, $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (559) 844-6989 now and a live person answers, 24/7. We’ll come out, measure your driveway, and give you a written price before any work starts. If it’s not done right, the 90-Day Done Right Promise means Hal comes back and makes it right. That’s the deal.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Hollywood since 2001.