Gate Realignment in Beverly Hills, CA

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

Wrought iron

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Gate Realignment in Beverly Hills, CA

Gate realignment in Beverly Hills typically costs between $150 and $350, depending on whether the issue is a simple hinge adjustment or requires structural welding to the post. If your gate is dragging on the concrete, struggling to latch, or hitting the catch plate, it is usually a sign that the hinge post has shifted or the gate frame itself has developed a slight sag. At Gatewood Fence & Gate, our Gate Repair services specialize in correcting these alignment issues on-site, ensuring your gate functions smoothly without needing a full replacement. If you are noticing these issues, give us a call at (559) 844-6989 for an honest assessment.

I have been fixing gates in the Beverly Hills area since 2001, and I have seen just about every way a gate can fall out of square. Most people think they need a new gate when they see a gap widening or a latch that won’t catch, but that is rarely the case. A gate usually sags because the weight is pulling on the hinge side, not because the gate material has failed. My job is to get that weight distributed correctly again so your gate swings true. We handle this as part of our broader Gate Repair in Beverly Hills services, and I personally make sure the job is done right the first time.

We do not believe in replacing hardware that still has years of life left in it. If your gate is dragging, we look at the foundation of the post, the integrity of the hinges, and the frame itself. Whether you have a heavy iron gate typical of the older estates near the Beverly Hills flats or a modern aluminum setup, the physics of a sagging gate are the same. We carry our welding equipment with us, so we can reinforce your frame right there in your driveway. You don’t have to wait for us to haul your gate off to a shop, and you don’t have to deal with a middleman. My name is on the shop, and my name is on the work we do.

When You Need Gate Realignment

You generally do not need a new gate just because it is acting up. In fact, most alignment issues are manageable if you catch them before the frame gets permanently warped. Here are the common signs that your gate needs professional realignment:

• Dragging on the Driveway: If you see a fresh scrape mark on your concrete or pavers, your gate is likely sagging. This is common in Beverly Hills after a rainy season when the soil around the post shifts, causing the hinge side to lean.
• Latch Misalignment: When the gate latch no longer hits the strike plate, it usually means the gate is sitting too low or has tilted backward. This is more than a nuisance; it is a security risk because your gate is not locking properly.
• Grinding Noises: If you hear metal-on-metal scraping when you open or close the gate, the hinges are likely stressed and failing to hold the weight of the frame. This creates friction that can burn out your gate motor if you have an automatic opener.
• Visible Gaps: If the gap between your gate and the fence post is wider at the top than the bottom, or vice versa, the gate is no longer plumb. This puts undue stress on your hardware and makes the gate harder to operate manually.
• Difficulty with Automatic Openers: If you use brands like BFT or Viking, the opener is calibrated to move a gate with a specific amount of resistance. If the gate is misaligned and dragging, the motor has to work twice as hard, which shortens its lifespan significantly.
• The “Spring-Back” Test: If you open your gate halfway and it swings shut on its own, it is not level. A properly aligned gate should stay exactly where you leave it.

Our Gate Realignment Process

I don’t believe in guesswork. When I show up to look at your gate, I follow a specific, proven process to get it back to working order. We have been doing this for over 29 years, and we know that a systematic approach saves you money in the long run. Here is how we handle a realignment job:

1. Structural Inspection: We start by checking the hinge post. If the post is leaning, no amount of hinge adjustment will fix the gate permanently. We determine if the post needs to be braced or if the issue is contained within the gate frame itself.
2. Hinge Reinforcement: If the hinges are worn or pulling away from the post, we replace them or weld them back to the steel. We use heavy-duty hardware that is rated for the weight of your specific gate, ensuring it can handle the daily cycles.
3. Frame Squaring: We use a level and a tensioning system to pull the gate back into a square position. If the frame is bent, we perform on-site welding to stiffen the joints, which is often enough to correct years of sagging.
4. Latch and Strike Plate Adjustment: Once the gate is hanging level, we adjust the latch so it catches cleanly every time. A latch should engage without you having to lift or push the gate.
5. Motor Calibration: If you have an opener, we adjust the force settings to match the now-smooth movement of the gate. This ensures your system runs efficiently and lasts as long as possible.
6. Final Testing: We cycle the gate multiple times while you watch, ensuring it stays in place and latches securely. Every job we do is backed by our 90-Day Done Right Promise, so if it isn’t right, you call me, and I come back to make it right.

Safety is a priority when dealing with heavy gates. If your gate feels like it is about to fall or the hinges are pulling out of a brick pillar, keep children and pets away from the area until we arrive. These gates can weigh hundreds of pounds, and they are dangerous when they are not supported correctly. We are fully licensed and insured, so you can trust us to handle these repairs safely and properly.

Gate Realignment Pricing in Beverly Hills

We believe in upfront pricing. You will never be surprised by a bill when we are finished. While every gate is different, see How Much Does Gate Repair Cost? (2026 Price Guide) - Beverly Hills, CA for what to expect before you call us.

Keep in mind that these are estimates. If your repair ends up being over $200, we apply a $40 discount automatically. We also offer a 10% discount for seniors and veterans, and we never charge a trip fee for jobs within the county. If you have a written estimate from another company, I am happy to provide a free second opinion. We are locally owned and owner-operated, and we have been serving the home owners in this area since 2001. We answer the phone 24/7, so call us at (559) 844-6989 whenever you are ready.

FAQs - Gate Realignment

Is it cheaper to repair a sagging gate or replace it?

In almost every case, it is significantly cheaper to repair a sagging gate than to replace it. A full replacement involves demolition, hauling away the old material, and installing a new system, which can cost thousands. Realignment usually involves simple welding or hinge work that brings your existing gate back to life for a fraction of that cost-learn more in our guide to How Much Does Gate Repair Cost in Los Angeles, CA? (2026 Price Guide). Call (559) 844-6989, and I will be happy to tell you if your gate is a good candidate for repair.

Can you fix a gate that uses a Linear or Ghost Controls system?

Yes, we are certified to service nine major gate brands, including Linear, Ghost Controls, Viking, and BFT. Even if your gate motor is working perfectly, a misaligned gate will eventually damage the opener. We align the gate first, then calibrate the opener settings to ensure the whole system works as a single unit.

How do I know if the problem is the gate or the post?

If the gate drags and hits the ground even when the latch is disengaged, it is likely a hinge or frame issue. If the entire post is leaning toward the street, the foundation of the post is likely the culprit. We inspect both the gate and the post during our initial visit to determine the exact source of the sag so we don’t fix the wrong thing.

Do you offer same-day service for gate realignment?

We do our best to accommodate urgent requests because a gate that won’t close is a major security risk for your home. Since we are locally owned and owner-operated, we offer Gate Repair Near Me in Beverly Hills, CA without clearing our schedule through a corporate office. Call us at (559) 844-6989 to see what our current availability looks like for today.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills.