Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLinear Gate Installation in Beverly Hills: What to Know First
Linear gate installation in Beverly Hills runs anywhere from $900 for a basic single swing gate to $6,000+ for a full sliding gate with operator, rack, and safety edges, and we typically complete most installations within 3 to 5 business days once parts are on hand. We’re an independent Linear service provider based right here in the area, and you’ll know the exact price before a single bolt gets turned. This page is for homeowners who own a Linear operator or gate and need it installed correctly the first time, not patched up by somebody in a rush. Call (559) 844-6989 and Hal Gatewood will talk you through what you’ve got and what it’ll take.
Key Takeaways
- We install Linear operators, gates, and full systems for driveways, pedestrian entrances, and security applications across Beverly Hills.
- Every installation carries our 90-Day Done Right Promise in writing.
- We quote upfront, and that’s the price you pay. No surprises at the door.
- Hal Gatewood has been at this since 2001, and his name is on the shop.
How Linear Products Fail - and How We Fix Them
Linear builds solid operators, but we’ve been inside enough of them in Beverly Hills to know exactly where they give out. Here’s what we regularly see:
- Linear LRA/LRB swing gate operators and burned-out motor capacitors. On older Linear swing arms, the capacitor goes weak over time and the gate starts moving halfway, then stops. Homeowners think the motor’s dead. We test the capacitor first because in Beverly Hills we replace these every month. The fix is a $30 part and a half hour of work, not a whole new operator.
- Linear SL series sliding gates and stripped drive gears. On Linear sliding gate operators, the plastic drive gear strips when the gate gets out of alignment and the motor keeps pushing against a wheel that can’t roll. We realign the track first, then replace the gear. Skip the alignment and you’ll strip the new gear inside a year.
- Linear APeX series and phantom open/close cycles at night. With the APeX board, stray RF interference from nearby wireless intercoms or security systems in Beverly Hills can trigger false opening and closing. We’ll swap in a newer receiver or change the frequency channel, then test it over a couple nights before we call it done.
- Linear M3 series and limit switches that forget their settings. On the M3 slide gate operators, the mechanical limit cams drift out of adjustment after a few years of daily cycles, so the gate slams open or doesn’t fully seat closed. We reset the limits and lock the cams down properly. It’s a fifteen-minute fix that most outfits turn into a service call every few weeks.
- Linear MegaCode receivers and dead remotes after a power surge. Here’s one most people don’t know: a nearby lightning strike or a transformer blow on Rodeo or Burton Way can fry the MegaCode receiver while the operator itself stays fine. The gate won’t respond to any remote, but the manual button still works. We test the receiver before quoting an operator replacement. Half the time, it’s a receiver swap and a new set of codes.
Our Linear Gate Installation Process
Here’s how a Linear installation goes when you call us:
- 1
You call, a live person answers. That’s Hal or someone on his crew, 24/7. We ask what the gate’s doing, what brand and model you’ve got, and whether it’s swinging or sliding. Tell me what it’s doing and I’ll tell you what it needs - no guessing, no runaround.
- 2
We come out and look at the whole gate, not just the motor. A Linear operator doesn’t fail because the motor got lazy. It fails because the gate sags in the hinge post, or the rack’s out of line, or a wheel’s seized. We diagnose the whole system before we touch anything.
- 3
We give you a written price. That’s parts, labor, and any welding that needs doing. No trip charge inside the county. If you already have an estimate from someone else, bring it out and we’ll give you a free second opinion on it.
- 4
We do the work on site. For a Linear install, that usually means mounting the operator, running power if needed, setting limits, programming remotes, and welding any bracket or post repairs right in your driveway. The gate stays where it belongs.
- 5
We test it like we own it. Full open and close cycles, obstruction sensing, safety edges, manual release. If it doesn’t run smooth, we’re not done.
- 6
We hand you the invoice with the 90-Day Done Right Promise on it. If anything’s not right within 90 days, one call brings us back. No runaround.
What Linear Gate Installation Costs in Beverly Hills
Beverly Hills pricing for Linear work varies by what you already have and what you’re adding. Here’s a straight look at what we charge:
| Linear Job | Typical Price Range | What’s Included |
|---|---|---|
| Linear swing gate operator install (new or replacement) | $900 - $1,800 | Operator, mounting, arm or piston, limit setup, 2 remotes, testing |
| Linear sliding gate operator install | $1,400 - $2,900 | Operator, chain or belt, track adjustment, safety edges if needed |
| Full driveway gate with Linear operator (fabricated steel or aluminum) | $3,200 - $6,000+ | New gate, posts, operator, hardware, wiring, full system check |
| Pedestrian gate with Linear opener | $1,100 - $2,300 | Gate, opener, keypad or remote, post mount |
| Linear MegaCode receiver or remote programming session | $90 - $250 | Receiver swap or remote replacement, code setup, range check |
What moves the price: gate weight and length, whether you need new posts, how far the power run is, and whether we’re welding reinforcement into an existing gate. We’re a shop that welds on site, so we can often save a gate that another outfit would tell you to scrap. Call (559) 844-6989 for an exact quote. Estimates are free, and the price we quote is the price you pay.
Why Beverly Hills Homeowners Call Gatewood Fence & Gate for Linear Work
Hal Gatewood grew up not far from Roxbury Park, went through the welding and fabrication program at Santa Monica College, and he’s been fixing gates in and around Beverly Hills since 2001, back when he was still driving a truck with a cracked windshield and a toolbox held shut with a bungee cord. We’re not a call center and we’re not a franchise van from somewhere three states away. We’re the local shop with Hal’s name on the door and a 90-Day Done Right Promise on every job. We service Linear, LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so if you’ve got a mixed-brand setup, we can handle all of it in one visit. One call brings Hal out, and he’ll tell you the truth about what your gate needs.
FAQs
Yes, we install Linear equipment you’ve already purchased, as long as it’s compatible with your gate and meets local code. We’ll inspect what you’ve got before we quote, and if something’s not going to work, we’ll tell you before you spend another dollar.
Almost always. We install Linear operators on existing gates in Beverly Hills regularly, including custom ironwork and older steel gates. We’ll check the hinge posts, the gate frame, and the clearance before we mount anything.
Most Linear installations start within a week of your call, and complete in 3 to 5 business days once parts are on hand. We keep common Linear parts on the truck, and if it’s a replacement operator, we can often start the same week. Call (559) 844-6989 and we’ll give you a straight answer on timing.
Linear’s manufacturer warranty generally requires installation by a qualified professional for full coverage. As an independent provider, we’re not authorized by Linear and don’t speak for their warranty department, but we install to manufacturer spec so your coverage stays intact.
If the motor’s healthy and the board’s not fried, repair is usually the smarter money. We’ll only recommend replacement when the repair cost tops 60% of a new unit, or when the operator’s so old that parts aren’t available anymore. We’re a repair-first shop, and we’ll show you exactly why we’re making whichever call we make.
Get Your Linear Gate Installed Right - Call the Shop
If you’re in Beverly Hills and you need a Linear gate installed, repaired, or just looked at by someone who’ll tell you the truth, call (559) 844-6989. Hal Gatewood will answer, and he’ll give you a straight answer. Free estimates, upfront pricing, and a 90-Day Done Right Promise on every job.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate at Gatewood Fence & Gate, serving Beverly Hills and nearby areas.