Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterWhy Beverly Hills Homeowners Choose Ghost Controls Gate Repair
We provide independent Ghost Controls gate repair service throughout Beverly Hills, from the Flats to Trousdale Estates, and we work on these systems weekly. Our crew knows the AXDP and DTP series inside out because we open them up constantly, not occasionally. We are not a Ghost Controls authorized dealer. We are an independent service provider, which means we answer to you, not to a manufacturer’s parts quota. When your gate stops working, call us at (559) 844-6989 and a live person picks up. The name on the shop is Hal Gatewood’s, and he has been fixing gates in and around Beverly Hills since 2001, back when his truck had a cracked windshield and a toolbox held shut with a bungee cord.
Why Trust Gatewood Fence & Gate for Your Ghost Controls Gate Repair?
Ghost Controls builds solid openers, but they have quirks that only show up after years in the field. Our technicians provide Ghost Controls service in Beverly Hills weekly, from AXDP and DTP series openers on private estates to ABBT battery backup modules on pedestrian gates, and we maintain a working knowledge of their control board generations and travel limits that only comes from independent repair volume. Hal went through the welding and fabrication program at Santa Monica College, and that foundation matters when a Ghost Controls operator is bolted to a custom iron gate that weighs four hundred pounds and needs a new mounting plate welded on site. We fix the gate in your driveway rather than hauling it off or swapping parts that don’t need swapping. Every job carries our 90-Day Done Right Promise in writing, and it is stated plainly, not buried in fine print.
Show me the gate closing on its own and I’ll show you where it’s failing. Hal Gatewood has been tracking down root problems in Beverly Hills since 2001, and he gets genuinely irritated when he opens up a gate mechanism and finds somebody else’s half-done Gate Repair work staring back at him. That irritation is your protection.
Common Ghost Controls Gate Repair Problems We Fix in Beverly Hills
These are the specific failures we see again and again on Ghost Controls systems in Beverly Hills. If your gate is doing one of these things, tell us and we’ll know where to start.
- AXDP series control board burnout after power surges. Beverly Hills hillside electrical services take hits during Santa Ana wind events and DWP switching, and the AXDP main control board absorbs that surge through the line. We see burned relays and dead boards on these dual gate openers regularly. The fix is a replacement board plus a surge-protected outlet so it doesn’t happen again in the same spot.
- DTP series limit switch drift causing the gate to stop short or slam. High-cycle use, which is common on busy estate driveways, wears the mechanical limit cams and the microswitches that tell the operator where the gate is. The gate loses its travel memory and either stops halfway or overruns into the end stop. We replace the limit cams, reset the travel limits, and recalibrate the slow-down points.
- ABBT battery backup failure from sulfation or dead 12-volt cells. These battery packs sit in below-grade housings and get forgotten until the power fails and the gate won’t open. Sulfation builds up when the batteries are not exercised, and the 12-volt cells die quietly. We test the pack, replace the failed cells or the whole module, and check the charging circuit before we leave.
- TSS1 and TSS2 solar panel wiring corrosion. Salt air carried inland from the Pacific settles on solar panel terminals and the low-voltage wiring, especially on hillside properties north of Sunset. The corrosion creates resistance, and the panel stops charging the battery fully. We clean the terminals, replace corroded connectors, and re-verify the charge voltage under load.
- One leaf dead on an AXDP dual gate. When one leaf won’t move but the other works, the problem is usually a burned relay on the control board or a broken limit wire in the hinge conduit, not the motor. Our tech traced a Gatewood Fence & Gate call on a Beverly Hills rear driveway to an AXDP dual opener where one leaf would not move. The issue was a burned relay on the control board after a DWP brownout; we replaced the board with an OEM unit, reprogrammed the travel limits for the offset hinge geometry, and added a surge-protected outlet to prevent repeat failures. The client’s security intercom integration was restored same day with no change to the existing keypad codes.
Ghost Controls Parts & Our Repair-vs-Replace Approach
We install genuine Ghost Controls circuit boards, limit cams, and remotes when lead time allows. Ghost Controls parts are generally available, and we keep the common replacements on the truck: limit switch assemblies, control boards for current-generation AXDP and DTP units, remotes, and battery pack components. But when a proprietary component is expired or on indefinite backorder, we source quality aftermarket boards with matching pinouts, and we test them for voltage compatibility before they go in. You will know exactly what part we are using and why before we install it.
There is a line where repair stops making sense. If we open up an older AXDP or DTP unit and find gearbox wear, frame stress, and a dead board at the same time, we will tell you the truth: a full operator replacement costs less in the long run than rebuilding a unit that is failing in three places at once. We are a repair-first shop, but we won’t repair a lost cause at your expense. The price is quoted and agreed before any work starts, and it will not change at the door. For an exact quote, call (559) 844-6989. Estimates are free.
Our Ghost Controls Service Process - Step by Step
- 1
Diagnosis on site. We check the control board, limit switches, battery voltage, and the physical gate itself: hinge wear, post plumb, and the load the operator is pulling. Hal or his crew will explain what is wrong in plain language before touching a single part.
- 2
Quoted repair, agreed upfront. You get a written price before the work starts. No trip charge inside the county, and $40 off any repair over $200.
- 3
Repair or replacement using tested parts. We install the OEM or compatible part, then reprogram travel limits and slow-down points to match the actual hinge geometry, not factory defaults.
- 4
Full cycle testing. We run the gate through at least a dozen open-close cycles, including obstruction tests and battery backup failover where the unit has an ABBT or similar module. We also test any intercom or smart-home trigger integration so the gate works when security calls or the Crestron system opens it.
- 5
Written warranty. Every job carries our 90-Day Done Right Promise. One call brings us back, no runaround.
Ghost Controls Products We Service & Install in Beverly Hills
We service and install the full Ghost Controls residential lineup: the AXDP series dual gate openers, DTP series swing gate openers, ABBL and ABBT battery backup systems, and the TSS1 and TSS2 solar swing gate openers. That covers most residential gate setups in Beverly Hills, from a light pedestrian gate on a Flats bungalow to a heavy ornamental steel driveway gate in Trousdale. We stock the common replacement parts locally, which means most repairs are completed in a single visit.
We Also Service These Brands
Ghost Controls is one brand on our truck, but not the only one. We are certified to service nine major gate brands, and the ones we see most often alongside Ghost Controls repair in Los Angeles and Beverly Hills are LiftMaster, Mighty Mule, and DoorKing. If your property has mixed hardware from previous repairs, we handle all of it in one visit.
FAQs - Ghost Controls Gate Repair Service in Beverly Hills
The beep means the operator has power but the control board is not sending a run command to the motor. The most common cause we see in Beverly Hills is a locked-out control board after a surge or brownout, usually on AXDP units with no surge protection. The board may need a reset, or it may be fried and need replacing. Then the fix is a replacement board plus surge protection so the next outage does not do the same thing. Call (559) 844-6989 and we’ll walk you through the reset on the phone before we even come out.
Yes, and this is a big part of our Beverly Hills work. These systems are often controlled by a Crestron, Control4, or Savant system, and the gate operator itself may be perfectly healthy while a firmware update silently broke the relay logic. Staff who treat it as a pure mechanical job misdiagnose this constantly. We work alongside the AV integrator or security firm to restore the trigger wiring and confirm the relay state, so the gate opens when the intercom says so. Tell me what it’s doing and I’ll tell you what it needs, no guessing, no runaround.
On a gate that cycles ten or more times a day, the DTP limit switches and cams should be checked every two years. Santa Ana winds add extra lateral load to the gate, which transfers to the operator and accelerates wear at the limit stops. We check the limit switch contacts, the cam wear pattern, and the travel limits during scheduled maintenance, and most people find their gate stops slamming after that.
That is almost always a control board relay failure or a broken limit wire, not a dead motor. The AXDP board runs both leaves separately, and when one relay burns out, the second leaf simply never receives its run command. We diagnose it by testing the relay outputs with a meter before assuming the motor is dead, because replacing a motor that was fine the whole time is the kind of lazy fix we clean up after. Call (559) 844-6989 for a free estimate.
Within their rated capacity, yes, but the installer matters more than the operator. A heavy steel estate gate with original 1930s iron work and a Ghost Controls opener bolted on poorly will eat the operator in a few years. The mounting plate, hinge geometry, and post plumb all have to be right. When the gate is properly hung and balanced, the DTP and AXDP units handle them well. We see unit failures on heavy gates far more often when a previous installer skipped the structural work and let the operator do the lifting.
Most Ghost Controls repairs in Beverly Hills run between $180 and $450 depending on the part and the failure. A limit switch replacement or travel recalibration is on the lower end; a control board replacement on an AXDP unit is on the higher end because of the part cost. Full operator replacement runs higher and depends on the gate size and weight. Every quote is written and agreed before we start, and we do not change it at the door. Call (559) 844-6989 for an exact quote, estimates are free, and you’ll get $40 off any repair over $200.
Book Your Ghost Controls Service in Beverly Hills, CA
A live person answers every call at (559) 844-6989, 24 hours a day. We are locally owned and owner-operated, Hal Gatewood’s name is on the shop, and every job carries the 90-Day Done Right Promise in writing. Call for a free estimate. If it’s not done right, we make it right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills since 2001.