Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Beverly Hills?
For most Gate Parts & Welding services in Beverly Hills, homeowners should expect to spend between $185 and $450 for a standard on-site service call, depending on the complexity of the weld or the specific hardware required. Because we handle welding right in your driveway, you avoid the cost and hassle of hauling a heavy gate to a fabrication shop, keeping your property secure and saving you time.
When your gate starts dragging or a hinge shears off, it’s rarely just a matter of “spot welding” a crack. In Beverly Hills, we see a lot of heavy custom ironwork that has been neglected until the stress points give way. My name is Hal Gatewood, and at Gatewood Fence & Gate, I’ve been repairing these systems since 2001. I don’t believe in replacing a perfectly good gate when a precise weld or a specific replacement part will make it run like new. If you’re looking for honest, upfront pricing from a local shop that won’t try to sell you a new gate you don’t need, give us a call at (559) 844-6989. We answer the phone live, 24/7.
Gate Parts & Welding Cost Breakdown (2026)
Pricing for gate repairs in our area is driven by labor time, the type of material (wrought iron vs. aluminum), and whether we need to source specialized gate parts. Below are the typical ranges you’ll see for common services in the Beverly Hills market.
| Service Type | Estimated Price Range |
|---|---|
| On-Site Welding Repair (Crack/Break) | $185 - $350 |
| Hinge Replacement & Alignment | $220 - $420 |
| Gate Opener Hardware/Arm Repair | $250 - $550 |
| New Gate Roller Installation | $190 - $380 |
| Custom Fabrication/Bracket Reinforcement | $300 - $600+ |
| Emergency Service Fee (Outside Standard Hours) | $150 - $250 (Added to base repair) |
These ranges reflect the cost of a professional, licensed, and insured repair. If you find someone offering to fix a structural gate weld for $50, you are likely paying for a cosmetic patch that will fail again in a month. A gate sags in the hinge post, not in the middle, and that is where we start. If we fix the panel without addressing the post, you will just end up fixing it twice. We stand behind our work with a 90-Day Done Right Promise, meaning if it isn’t right, we come back and make it right.
What Affects Gate Parts & Welding Pricing in Beverly Hills
Several factors influence the final bill when we show up to your property. Being transparent about these factors is part of how we operate at Gatewood Fence & Gate.
- Extent of Structural Damage: A clean break is quick to weld. However, if the metal has rusted through or the internal support is compromised, we have to cut out the bad steel and weld in new material. This takes more time and adds to the cost.
- Gate Material: Wrought iron is heavy and requires specific welding techniques to maintain the integrity of the design. Aluminum gates are lighter but require different welding rods and heat settings. We are equipped to handle both.
- Accessibility of the Gate: In some Beverly Hills neighborhoods, gates are tucked into tight driveways or steep inclines. If we have to maneuver heavy welding equipment into a difficult spot, it adds time to the job.
- Availability of Proprietary Parts: We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate uses a discontinued part, we may need to fabricate a custom bracket or source a compatible alternative, which affects the final estimate.
- Site Safety Requirements: High-tension gate systems are dangerous. If your gate has malfunctioning cables or springs that are under load, we must perform a safety assessment before welding. We never compromise on safety.
Because we are locally owned and owner-operated, we don’t have the overhead of a national franchise. We pass those savings on to you. If you have a written estimate from another company, I am happy to provide a free second opinion. Call (559) 844-6989 to discuss your specific gate needs.
How to Save on Gate Parts & Welding
You don’t need to overpay to keep your property secure. Here are a few ways to manage your repair costs without sacrificing quality.
1. Catch the Problem Early
A gate that drags on the driveway is a sign of a failing hinge or a sinking post. If you hear grinding or see the gate leaning, call us immediately. A $200 hinge adjustment is significantly cheaper than replacing a gate that has collapsed and damaged the motor, which can easily run into the thousands.
2. Ask About Our Standing Offers
We believe in fair, transparent pricing. We offer $40 off any repair over $200. We also provide a permanent 10% discount for seniors and veterans. These aren’t temporary promotions; they are part of how we do business.
3. Avoid “Band-Aid” Repairs
It is tempting to hire the cheapest person to slap a weld on a crack. But if the underlying cause-like a loose hinge or a misaligned post-isn’t fixed, the metal will crack again right next to the repair. Do it right the first time. The name is on the shop, and the shop is down the road; that is the oldest accountability there is.
4. Schedule During Standard Hours
While we are available 24/7 for emergencies, scheduling non-urgent repairs during our standard business hours helps you avoid emergency service fees. Give us a call at (559) 844-6989 and we can get you on the calendar.
How We Handle On-Site Welding
When you choose our home services for your gate parts & welding in Beverly Hills, we bring the shop to you. We don’t believe in hauling your gate away to a facility. Here is how we ensure the job is done correctly:
- Assessment: We inspect the gate and the mounting points to determine the cause of the failure, not just the symptom.
- Preparation: We clean the metal surfaces, removing paint, rust, and debris to ensure a strong, clean weld.
- Welding: We use professional-grade welding equipment to reinforce the structure, ensuring the bond is stronger than the original factory weld.
- Finishing: We grind the weld flush and apply a protective coating to prevent future rust and corrosion.
- Testing: We cycle the gate multiple times to ensure smooth operation and proper alignment before we leave.
If you need expert care for your gate, don’t wait for a total failure. We provide a free second opinion on any written estimate you have received. Our goal is to fix your gate so it lasts, not to upsell you on parts you don’t need.
FAQs - Gate Parts & Welding Cost
How much does it cost to weld a broken gate hinge in Beverly Hills?
Repairing a broken gate hinge typically costs between $220 and $420, depending on whether we need to replace the hinge entirely or simply re-weld the existing one to the post. We ensure the hinge is perfectly aligned so the gate doesn’t sag again. Call (559) 844-6989 for an exact quote.
Is it cheaper to repair or replace a damaged gate?
In most cases, repairing a gate is significantly cheaper than replacing it, often costing a fraction of a new installation. If the gate frame is sound, we can usually weld, reinforce, and replace hardware for a few hundred dollars. We will always give you an honest assessment of whether a repair is safe and viable.
Do you charge a trip fee for estimates?
We do not charge a trip charge for service calls inside the county. We believe in upfront pricing and honest communication. If you have a written estimate from another company, we are happy to provide a free second opinion.
Can you fix my gate today?
We offer 24/7 service and prioritize urgent repairs, especially when a gate is stuck open and poses a security risk. A live person answers our phone around the clock, so you will never be stuck waiting for a callback. Call (559) 844-6989 to see when we can get to your property.
Do you work on all gate brands?
We are certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you have a different brand, give us a call anyway-we have decades of experience with custom ironwork and gate systems and can likely help.
Pricing reflects the Beverly Hills market as of 2026. Gatewood Fence & Gate offers free estimates - call (559) 844-6989. Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills since 2001.
What Our Customers Say
"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly