Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Tarzana
Gate hinge and weld failures across Tarzana run along two fault lines: the Santa Ana winds that slam heavy iron gates against their stops north of Ventura Boulevard, and the 105°F-plus Valley heat that cooks grease out of operator gearboxes everywhere else. Most gate parts and welding calls we run in Tarzana fall into a predictable pattern: a post has leaned, a hinge barrel has torn, or a rack and pinion has drifted out of alignment on a graded driveway. We repair the gate where it stands, weld it in your driveway, and stand behind the work with our 90-Day Done Right Promise in writing. Call (559) 844-6989 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Tarzana’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop and on every invoice. When you call, you talk to a person who knows what a Tarzana canyon-lot driveway looks like after a Santa Ana event, not a call center three states away. Our crew has rebuilt hinges on Vanalden Avenue ranch-style side gates and re-welded post brackets on estate gates up near Braemar. We answer the phone 24/7.
What people in Tarzana tell us they want is simple: a company that shows up, quotes a price before work starts, and does not try to sell them a whole new gate when two hinges and a post footing would fix it. That is how we work. We also carry a published license number anyone can look up and a published address, because accountability is not a slogan. The name is on the shop, and the shop is down the road.
Scheduling from our Los Angeles office means crews reach Tarzana fast, without a trip charge inside the county. When you call, you will get a straight answer about when we can be there. If you already have a written estimate from another company, bring it. We will give you a free second opinion. Seniors and veterans get a permanent 10% discount, and any repair over $200 takes $40 off. Those are standing offers, not haggling points.
Our Gate Parts & Welding Services in Tarzana
We do not haul your gate off to some shop across the Valley and bring it back a week later. The gate stays in your driveway. The welder comes to you. That matters in Tarzana, where a gate off its post on a hillside lot is a security gap you cannot leave open overnight.
Hinge Replacement
Hinge replacement in Tarzana is rarely just about the hinge. The real problem lives in the post. A heavy iron swing gate on a hillside estate gets slammed into its stop by Santa Ana gusts, and every hit pushes the hinge post a little further out of plumb. Then the hinge barrels start to bind, then the welds shear. We replace the hinge and fix what caused the failure, often resetting the post with a deeper concrete footing and upgrading painted steel hinges to stainless hardware rated for the load.
Post Replacement
Tarzana sees more post replacement work than most Valley communities because of the grades. A post set in a shallow footing on a sloping canyon lot will lean within a few years, especially if the gate is heavy. We dig, set, and brace a new post to hold on the specific slope it is on, then rehang the gate so it swings true. South of Ventura, older ranch homes often have steel posts rusted at the base in irrigated planter beds. Weld a patch on a rust-blind post and you will weld it again in a year; we replace the post instead.
Rail Repair
Gate rails take abuse in Tarzana. Heat warps aluminum frame pickets out of plumb, and repeated wind loads twist top rails on iron gates. The result is a gate that drags, a latch that no longer lines up with its keeper, or an operator that fights the frame on every cycle. We straighten, weld, or replace the rail, then re-align the operator so it is not working against a frame that has moved.
Custom Welding
Not every Tarzana gate problem has a parts catalog answer. Cracked scrollwork, a broken gate roller bracket, a latch post torn from its mount on an irregular canyon-lot fence line: these are custom welding jobs. We weld on site. If the piece is small enough to bring to the truck, we can often handle it same day. For larger structural work on heavy estate gates, we quote the job in writing before any arc is struck.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tarzana
Our crews are certified on nine major gate brands, including BFT, Linear, and Viking, which covers most of the automated systems we see across Tarzana hillside properties. We also service Ghost Controls, LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. Because we see the same racks, pinions, and operator failures repeatedly in Tarzana’s climate, we keep the common replacement parts for these systems on the truck. That means fewer trips to the supply house and less time with your driveway half-blocked by a dead gate.
Common Gate Parts & Welding Problems We See in Tarzana Homes
- Santa Ana-sheared hinge welds on hillside swing gates. North of Ventura Boulevard, heavy iron gates get slammed by wind gusts that funnel down from the Simi Hills. Weld points at the hinge barrels are the first to fail, followed by latch keepers. On a steep driveway off Reseda Boulevard near Braemar Country Club, our crew replaced a sagging swing gate’s hinge post and re-welded the hinge barrels after Santa Ana winds had sheared the original welds. We reset the post with a deeper concrete post footing and swapped the painted steel hinges for stainless hardware, then re-aligned the gate operator so the safety photocell beam cleared the new post.
- Slide gate operators burned out on graded canyon driveways. Many Tarzana estates north of Ventura sit on driveways with a noticeable grade. A slide gate on that ground means the motor works against gravity on every close cycle. Underpowered aftermarket motors die within a year or two. We flag this when quoting a motor replacement, because putting the same cheap unit back in is a waste of your money and our truck roll.
- Heat-seized gearboxes and warped aluminum pickets. Summer temperatures in this part of the western San Fernando Valley hit 105-110°F. That heat breaks down grease in operator gearboxes and warps aluminum pickets out of plumb, which throws the rack and pinion out of alignment. Regular lubrication and realignment are not optional here; they are the difference between an operator lasting five years and failing in two.
- Rusted post bases on ranch-style side gates south of Ventura. The 1950s-1970s tract homes south of Ventura Boulevard have a lot of wood and chain-link side-yard gates. The steel posts on those gates are often set directly in soil that gets irrigated regularly. Rust attacks the post at ground level, the gate sags, and the latch stops lining up. We replace the post and set it in concrete well above grade so it does not happen again next season.
Pricing for Gate Parts & Welding in Tarzana, CA
Here are straight numbers for Tarzana, because you should know before you call. Hinge replacement with a standard duty hinge set typically runs $240-$390, including welding and realignment. Post replacement with a deeper concrete footing runs $400-$680 depending on post size and slope. Custom welding jobs start around $180 for a small bracket or crack repair and scale from there; a structural fatigue repair on a heavy iron estate gate can run $500-$1,200, which is still far less than replacing the gate. Rail repair runs $200-$450. Gate roller replacement is $120-$240. Latch and lock work runs $150-$320. Every price is quoted and agreed before any work starts, and the quote holds. Call (559) 844-6989 for a free estimate.
We Also Serve Cities Near Tarzana
Our crews work throughout the western Valley. If you are in Encino, Reseda, Sherman Oaks, or Van Nuys, we run the same local schedules and the same no-trip-charge policy inside Los Angeles County. For details on coverage across the area, see Gate Parts & Welding in Tarzana.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tarzana
No permit or inspection is required for a standard hinge replacement or post repair on an existing gate, including in the hillside areas north of Ventura Boulevard. What does matter in Tarzana specifically is that automated vehicular gates within City of Los Angeles jurisdiction must maintain LAFD-compliant Knox Box access and LAPD rapid-access standards. If your gate has a Knox Box mounted near the post and we reset or replace that post, we surface-mount the box in the same accessible position so your fire department access is not interrupted. Call (559) 844-6989 and we will tell you exactly what applies to your gate.
Slide gate operators on Tarzana hillside driveways fail most often because they are under-powered for the grade. On a sloping canyon lot, the motor has to push the gate uphill against gravity on every close cycle. An aftermarket unit sized for a flat driveway never gets a break, so its gearbox and limit switches burn out in a year or two. The fix is an operator sized for the grade, a properly aligned rack and pinion, and regular greasing through the Valley’s hot summers. If you have already replaced the operator once and it failed again, the motor is probably not the real problem; the grade is. Call (559) 844-6989 and we will look at the whole setup, not just swap the box.
Yes, for Tarzana properties in the foothills and canyon areas north of Ventura, stainless hinges and stainless fasteners are worth the upgrade. The heat in this part of the Valley is not corrosive the way salt air is, but the repeated stress from Santa Ana wind loads and the expansion and contraction from 105°F summers work painted steel hardware until the coatings crack and corrosion starts at the stress points. Stainless hardware holds its strength through those repeated load cycles and does not rust when the paint fails. The cost difference on most gates is $60-$120 in parts, and it buys years of service life. Call (559) 844-6989 and we will quote both options so you can decide.
In most Tarzana cases, we can repair just the hinge post and rehang the existing gate without replacing the whole thing. The gate itself is usually still sound; the failure is in the post, the hinge barrels, or the weld between them. We dig out the old post, set a new one in a deeper concrete footing, weld on new hinge mounts, and rehang the gate so it swings true. If the gate frame is also cracked or the rail has twisted beyond repair, we will tell you that plainly and quote the welding work to fix it. We do not sell you a new gate when a post and two hinges will do the job. Call (559) 844-6989 for a free estimate and we will tell you what actually needs to be done.
Yes. Automated gate operators in Tarzana, like everywhere in Los Angeles County, require functioning entrapment protection: photo-eyes across the gate opening, contact edges, or a monitored reversing system, depending on the operator and gate type. When we reset a hinge post or realign a gate operator on a hillside property, we verify the photo-eye beam still clears the new post and the gate reverses properly before we leave. It is a safety issue and a compliance issue, and we do not let it slide. Call (559) 844-6989 and we will check yours during any service call.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tarzana and the western San Fernando Valley since 2001.