Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Sherman Oaks
If your gate is sagging, dragging, or flat-out refusing to move in Sherman Oaks, we can usually have it diagnosed the same day. Gatewood Fence & Gate has been repairing gates the right way since 2001, and our Gate Parts & Welding team handles hinge replacements, post rebuilding, rail repair, and custom welding on site in your driveway so the gate never leaves your property. Call us at (559) 844-6989 and you’ll get a live person, not a recording, any hour of the day.
Sherman Oaks is a particular kind of town for gate work. The hills between Ventura Boulevard and Mulholland Drive pitch driveways at grades that would make a flatland gate installer blink, and decades of Valley heat have done a number on the wood posts and cast-iron hardware holding those gates up. We know exactly what fails here and what it takes to fix it properly.
Why Gatewood Fence & Gate Is Sherman Oaks’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001 and his name is still on every invoice. That matters in Sherman Oaks, where homeowners have been burned by outfits that send a salesman in a truck, quote one number over the phone, and show up with a different one at the door. We don’t do that here. Hal is the one who answers your call, and the person who shows up to weld your gate is somebody he’d vouch for by name.
Most of our Sherman Oaks work comes from referrals. A neighbor on Longridge Avenue or Valley Vista Boulevard tells another neighbor, because the gate we fixed in 2019 is still opening smoothly while theirs has started grinding. That’s the kind of reputation you build in a community like this, where people actually know each other and the hardware store on Ventura is still a place you run into your mechanic.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, Hal comes back and makes it right, no runaround. That’s not a line on a flyer. It’s how a one-owner shop keeps its name clean in a city where word travels fast.
Our Gate Parts & Welding Services in Sherman Oaks
Hinge Replacement
On Sherman Oaks hillside properties, the hinge is where gravity does its quiet damage. A 12% grade means the gate’s full weight leans on the top hinge every second it’s closed. We replace hinges with heavier-duty steel rated for sloped installations, not the thinner hardware flat-valley suppliers send. A properly gusseted hinge on a hillside gate should last 15 to 20 years before it even thinks about sagging.
Post Replacement
This is the big one in Sherman Oaks. The 1950s and 60s ranch homes on the Valley floor and the hillside construction from the 70s and 80s both came with wood gate posts. Termites and extreme heat cycles have hollowed a lot of them out from the inside. We rebuild posts at grade, set new concrete footings, and weld steel reinforcement plates where the anchor bolts meet the wood. A gate sags in the hinge post, not in the middle, and that’s where we start.
Rail Repair
A bent bottom rail from a car bump, a cracked weld from years of Santa Ana gusts slamming the gate against the stop. We straighten what’s salvageable and weld in new steel where it isn’t. Our crew carries a welder on every truck, so the repair happens in your driveway, not at some distant shop two weeks later.
Custom Welding
Older Sherman Oaks gates often have details worth saving, a wrought-iron scroll pattern or a tubular frame from the 1980s you can’t order anymore. We weld new steel to match what’s there, reinforcing rusted joints and replacing broken pickets individually. If the frame is sound, you keep your gate and we make it strong again. If it’s rotted through, we’ll tell you straight: replacing the panel without the post means you’ll fix it twice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sherman Oaks
We service and retrofit operators from Linear, Ghost Controls, BFT, and other major brands. When your 1980s Apollo or early LiftMaster board finally gives out, don’t expect to find parts. Sherbox inventories are long gone. We’ll tell you honestly what can be retrofitted and what’s better replaced with a modern operator sized for your driveway’s slope. We stock common hinges, rollers, latches, and control boards for the brands we service, so Sherman Oaks customers aren’t waiting on a slow warehouse shipment.
| Service | Typical Sherman Oaks Price Range |
|---|---|
| Hinge replacement (pair, steel, sloped grade) | $275 - $450 |
| Post replacement with new footing | $400 - $800 per post |
| Rail repair or reinforcement | $150 - $400 |
| Custom welding (per hour, on site) | $95 - $140 |
| Operator retrofit for 10-15% grade | $900 - $1,800 installed |
Common Gate Parts & Welding Problems We See in Sherman Oaks Homes
- Failed Apollo and early LiftMaster boards. The 1980s and 90s security boom put a lot of driveway gates on Sherman Oaks hillside and ranch properties. Those original control boards are now failing outright, and parts are gone. We retrofit modern electronics into the existing operator housing when the motor is still sound.
- Posts rotted at grade. Sherman Oaks soil stays damp beneath the surface even in the dry season, and the native termite pressure here is relentless. A wood post that looks fine at eye level can be hollow at the base. We probe every post on every call.
- Slide gates binding in summer heat. When the Valley runs over 105°F, steel panels expand measurably. A gate that rolls free at dawn can seize tight by 2 p.m. It’s not always the track. Often it’s the alignment of the welded frame shifting microscopically under repeated heat cycling.
- Santa Ana wind damage. Gusts funnel straight through the Sepulveda Pass into the Valley, and swing gates take the brunt. Hinge pins bend, rack gears strip, and masonry columns crack at the operator mount. We see it after every wind event on the streets between Ventura Boulevard and Mulholland.
Pricing for Gate Parts & Welding in Sherman Oaks, CA
Hinge replacement in Sherman Oaks typically runs $275 to $450 for a pair on a sloped driveway. A post replacement with new concrete footing runs $400 to $800 per post depending on size and access. Rail repair falls between $150 and $400. On-site custom welding rates in this market run $95 to $140 per hour. An operator retrofit sized for a 10 to 15% grade runs $900 to $1,800 installed. Every price is written down and agreed to before any work starts. The number you sign is the number you pay. We don’t add trip charges inside the county, and we offer $40 off any repair over $200. Call (559) 844-6989 for an exact quote on your gate.
Serving Sherman Oaks, CA - Our Local Coverage Area
We’re based in the Sherman Oaks area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Sherman Oaks
In most cases, yes, we can retrofit a modern operator onto your existing gate and mounting. If the gate frame is straight, the hinges are tight, and the post is sound, a retrofit runs $900 to $1,800 installed and keeps your existing ironwork. If the board failure also took out the limit switches or the gearbox is scored, replacement is usually the cheaper path. Call (559) 844-6989 and Hal can tell you which direction makes sense for your specific gate.
When outdoor temperatures pass 105°F, steel gate panels expand by roughly a sixteenth of an inch per ten feet of width. On a 14-foot driveway gate, that’s enough to close the clearance between the rollers and the track. The temporary fix is adjusting the roller height or the track shims, but the permanent fix is re-welding the frame with proper expansion allowances for this climate. We account for the Valley heat when we fabricate and align.
Push the gate laterally, not swinging it, just push side to side. If the post flexes at the base, even slightly, the wood below grade is compromised. Hinge repair on a rotted post is like bracing a toothpick. In Sherman Oaks, where 10 to 15% grades put constant load on the uphill hinge, we almost always find that a post that’s been sagging for more than a season needs replacement, not just new hardware. Call (559) 844-6989 for an honest assessment.
If the steel tubing is rusted through in more than one or two spots, or the frame has bowed from repeated repairs, replacement is the more honest answer. But a single cracked weld or a bent rail on an otherwise straight frame can typically be welded back stronger than new. We’ll tell you straight which one you have after a five-minute look. Estimates are free.
Most operators installed before 1993, and many from the 1990s, do not meet today’s UL 325 entrapment protection standards. Sherman Oaks gates on hillside driveways are especially dangerous if a child or animal gets caught, because a gravity-loaded gate closes with significant force. We retrofit photo eyes, edge sensors, and current-generation control boards on older operators whenever the motor is still worth saving. If it’s not, we’ll tell you that too. Your quote covers everything, and the 90-Day Done Right Promise applies either way.
We Also Serve Cities Near Sherman Oaks
Along with Gate Parts & Welding in Sherman Oaks, we run calls to Van Nuys, Encino, Studio City, and Tarzana. Hillside or flat, wrought iron or tubular steel, the same crew and the same promise apply. Dispatch and scheduling are coordinated from our Los Angeles office, and our welding crews serve Sherman Oaks locally. Call (559) 844-6989 for a free estimate anywhere in the area.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sherman Oaks since day one of every gate we’ve touched.