Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Marina del Rey
A new driveway or pedestrian gate in Marina del Rey typically runs $2,800 to $9,500 installed, with sliding gates for condo garages landing between $4,200 and $8,000 depending on track length and operator choice. Most installations take one to two days on site once materials are ordered, and the price is quoted and agreed before any work starts. If your gate is original to a 1970s complex or hasn’t rolled clean in years, call Hal at (559) 844-6989 and we’ll take a hard look at whether it’s a repair or a replacement. We know this harbor community’s gates because we’ve been called in to fix what other crews walked away from.
Why Gatewood Fence & Gate Is Marina del Rey’s Preferred Gate Installation Company
Hal Gatewood has been doing gates since 2001, and his name is on the shop and on every invoice. That matters in Marina del Rey, where the workload is mostly 1963 to 1985 apartment and condo complexes with slide gates that have seen decades of salt air. We’re not a faceless outfit that sends a different subcontractor every visit. The person who shows up has seen your kind of gate before. The Marina del Rey gate work we do leans heavily on the same few failure points: corroded hinge posts, salt-damaged control boards, and underground loops shorting out near the water. A live person answers our phone 24 hours a day, and every job carries our 90-Day Done Right Promise in writing.
We’re also honest about what can be fixed. A sagging gate is usually a failing hinge post, not a bad panel. Fix the panel without the post and you’ll fix it twice. That repair-first habit has built our reputation along Admiralty Way, Via Marina, and the condo rows south of Washington Boulevard. Customers in Marina del Rey call us because they want a gate that stops requiring monthly adjustments, and they want someone who’ll return if it doesn’t.
Our Gate Installation Services in Marina del Rey
Driveway Gate Installation
A new driveway gate in Marina del Rey runs $3,500 to $9,500 for a standard single swing or slide setup with operator, safety edges, and keypad. On older complexes, we’ll assess the existing post footings before ordering any steel. Salt air rots posts from the inside out here, and hanging a new gate on a compromised post guarantees a repeat call in two years. We quote the full job up front, including haul-away and the operator, and that price is what you pay.
Pedestrian Gate Installation
Pedestrian gates at Marina del Rey condos are often the most abused entry point on the property. They take direct marine air, tenant abuse, and constant cycling. A new aluminum or steel pedestrian gate with keypad access typically runs $1,800 to $4,200 in this area. We prefer marine-grade aluminum for harbor-adjacent buildings because it doesn’t rust the way powder-coated steel eventually will, and we’ll tell you if that’s the better spend for your location.
Sliding Gate Installation
This is the bread and butter of Marina del Rey gate work. The dense stock of 1970s condominium complexes almost universally runs sliding gates on underground garage entrances. A full slide gate replacement with a new operator from LiftMaster, BFT, or Viking runs $4,200 to $8,000 depending on gate length, track condition, and whether we’re also replacing the loop detector. We install the safety photocells and edges that modern code requires, which many of those original 70s gates never had. On a building full of residents and vehicles, that matters more than most managers realize until something goes wrong.
Swing Gate Installation
Swing gates near the marina fail at the hinge post, full stop. The gate sags in the post, not in the middle, and that’s where we start. A new swing gate installation for a Marina del Rey driveway or side entrance typically runs $2,800 to $6,500 with operator. We dig down to inspect the existing post footing, and if it’s rotted, we reset it in marine-grade concrete before hanging anything. Skipping that step is how you end up with a gate that never stays aligned with the loop detector.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Marina del Rey
We service and install major gate brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On Marina del Rey jobs, we most often work with LiftMaster, BFT, and Viking operators because they hold up better in salt-heavy environments and have parts that are actually obtainable when a condominium board needs a fix quickly. We stock common boards and safety components for these brands, which means less waiting when your garage gate goes down during a Tuesday morning rush. We don’t push one brand for every job. The right operator depends on gate weight, cycle count, and how close the hardware sits to the water.
Common Gate Installation Problems We See in Marina del Rey Homes
- Salt-corroded control boards. The marine layer off the harbor deposits salt particulate directly onto low-voltage connections, and over time the board shorts out intermittently. The gate acts like it’s possessed, but it’s usually rust on a terminal block, not a ghost.
- Rotted hinge posts on swing gates. Original steel posts from the 60s and 70s rust from the inside out within a few hundred yards of the harbor. The gate sags, the loop detector misaligns, and the operator grinds.
- Failed underground loop detectors. Saltwater intrusion into cracked asphalt around marina-access gates shorts out the loop, which makes the gate ignore keypad commands and sometimes refuse to close. This is a common repair call after rainy weeks or king tide cycles.
- Legacy slide operators reaching end of life. Original DoorKing or FAAC slide units from the 1970s and 80s often can’t be economically rebuilt when the board, limit switches, and motor all fail at once. At that point retrofitting a modern operator on the existing track and gate is usually the smarter money than patching a 50-year-old unit.
Pricing for Gate Installation in Marina del Rey, CA
Here’s what gate installation actually costs in Marina del Rey, based on the work we’ve quoted and completed around this harbor. A basic pedestrian gate with keypad runs $1,800 to $4,200. A single driveway swing gate with operator and safety equipment is $2,800 to $6,500. A full sliding gate replacement with new operator for a condo garage entrance runs $4,200 to $8,000, and larger double-gate or security gate installations land between $6,500 and $9,500. Factors that move the price: gate width and weight, whether we’re resetting post footings, the brand and capacity of the operator, and how much of the existing track or underground loop we can reuse. Every price is quoted and agreed before any work starts. Senior and veteran customers receive a permanent 10% discount, and we offer a free second opinion on any written estimate you’ve received from another company. Call (559) 844-6989 and we’ll give you a real number, not a range that doubles at the door.
We Also Serve Cities Near Marina del Rey
Our crew works regularly in Gate Installation projects across the Westside. We serve Marina del Rey and also run calls to Culver City, Santa Monica, Beverly Hills, and West Hollywood. If your building sits in one of those nearby cities and you’re dealing with the same salty corrosion problems, call us. We’re already working up and down Lincoln Boulevard and Washington Boulevard.
Serving Marina del Rey, CA - Our Local Coverage Area
We’re based in the Marina del Rey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Marina del Rey
No. Marina del Rey is unincorporated Los Angeles County, so gate and fence permits run through the LA County Department of Building and Safety rather than LADBS. Out-of-area contractors frequently assume city rules apply and stall jobs when the county permit office flags the difference. We handle county permit requirements regularly on Marina del Rey apartment and marina-access projects, and we’ll tell you exactly what the county will ask for before we order materials. Call (559) 844-6989 if you want a straight answer on your specific building.
The persistent marine layer off the harbor keeps relative humidity elevated year-round and deposits salt particulate directly onto gate hardware, which corrodes iron and steel components from the inside out and shorts low-voltage control boards at rates that surprise technicians used to working even a few miles inland in Culver City. Every gate repair call in Marina del Rey is really a salt-corrosion call first. That’s why we use marine-grade hardware and insulation practices on operators installed near the water.
Yes, in most cases. We can add modern safety photocells, safety edges, a new operator, and a fresh loop detector to an existing steel gate as long as the gate itself and its post footings are structurally sound. The decision point is usually the hinge posts and the slide track. If those are rotted from salt air, retrofitting the electronics onto a failing frame is wasted money, and a full replacement becomes the cheaper answer over three to five years. We’ll show you what we’re seeing before we recommend anything.
Original hinge posts from the 1960s and 70s, especially within a few hundred yards of the harbor, corrode from the inside out because salt air works its way down the post and into the footing. The post weakens, the gate tilts, and the panel pulls the hinge-side frame out of alignment. A gate sags in the hinge post, not in the middle, and that is where we start. We correct it by resetting the post footing in marine-grade concrete before re-hanging or replacing the gate.
For most Marina del Rey condo garage entrances, a sliding gate is the better fit because it doesn’t need room to swing into the driveway or sidewalk and handles high cycle counts better than a swing gate. The catch is that slide gates depend on a clean, well-anchored track and a functioning loop detector. If the existing track is rusted or the asphalt around the loop is cracked, a swing gate might actually be the lower-maintenance choice. We’ll look at your specific entrance, count the daily cycles, and tell you which we’d install if it were our building.
Call Gatewood Fence & Gate for Gate Installation in Marina del Rey
If your gate grinds, sags, or ignores the keypad, call us at (559) 844-6989. Hal will talk you through what he thinks is wrong, and if you want, he’ll come look at it and give you a written quote before any work starts. Every install carries the 90-Day Done Right Promise in writing. No dispatch queue, no out-of-state call center. Just a live person who knows gates and knows Marina del Rey. Call today and get a straight answer about your gate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Marina del Rey and the Westside since 2001.